Electrical impedance tomography for void fraction measurements of harsh two-phase flows : prototype development and reconstruction techniques - CEA - Commissariat à l’énergie atomique et aux énergies alternatives Accéder directement au contenu
Thèse Année : 2017

Electrical impedance tomography for void fraction measurements of harsh two-phase flows : prototype development and reconstruction techniques

Tomographie d'impédance électrique pour la mesure du taux de vide d'écoulements sous pression : developpement d'un prototype et de techniques de reconstruction

Antoine Dupre

Résumé

Recent developments with data acquisition equipment have reduced the time required for image acquisition with electrical tomography, thereby bringing new opportunities for the study of fast-evolving two-phase flows. Amongst the numerous advantages of this imaging technique for multiphase flow related research are non-intrusiveness, high acquisition rates, low-cost and improved safety. A set of electrodes placed on the periphery of the pipe to be imaged is used to impose an electrical excitation and measure the system response. The distribution of phases inside the study volume distorts the electrical field in a characteristic manner. The objective of this thesis is to assess the potential of electrical impedance tomography at high acquisition rate. The first stage consists in developing a prototype sensor and assessing its performance with simplistic experiments. The system architecture employs voltage control of the excitation and therefore does not require the implementation of the conventional voltage-to-current converter module. A novel data collection method, the full scan strategy, is considered and provides correcting factors for the parasitic impedances in the system. The second stage is the image reconstruction from the measurement data. The approach considered in the thesis is to assume that flow regime identification techniques may provide valuable information on the phase distribution that can be injected in the inverse problem for imaging, thereby tackling the challenge of the non-linearity of the inverse problem. A method for horizontal air-water flow regime identification has been elaborated with an electrical capacitance tomography sensor and multiphase flow rig tried and tested. It is being adapted to the fast electrical impedance tomography prototype and upgraded to include vertical flow regimes. In parallel, an image reconstruction method has been developed based on the NOSER algorithm and a pseudo-2D postulate. The analysis of the reconstructed images for a set of benchmark experiments provide insights on the merits and deficiencies of the algorithm and of the prototype.
Les récentes avancées technologiques des matériels d’acquisition de données ont permis de réduire le temps d’acquisition d’image en tomographie électrique, ce qui offre des opportunités pour l’étude des écoulements diphasiques transitoires. Parmi les nombreux atouts de cette technique d’imagerie d’écoulements diphasiques, on peut citer son caractère non-intrusif, sa haute fréquence d’acquisition et son faible coût. Un ensemble d’électrodes placées sur le pourtour d’une conduite servent à transmettre une excitation électrique au milieu et à le sonder. Ainsi, la distribution des phases perturbe les champs électriques de manière caractéristique. L’objectif de cette thèse est d’évaluer le potentiel de la tomographie d’impédance électrique rapide. La première étape consiste au développement d’un prototype de capteur et à l’évaluation de sa performance par des essais simplifiés. L’architecture du système utilise un contrôle en potentiel du signal d’excitation et ne nécessite donc pas d’implémenter un module de conversion tension-courant. La seconde étape est la reconstruction de l’image à partir des données mesurées. L’approche qui a été considérée est de supposer une image approchée de la distribution des phases grâce à une identification du régime d’écoulement. Ainsi, le défi de résoudre un problème inverse fortement non-linéaire est simplifié. Une méthode d’identification de régimes d’écoulements horizontaux eau-air a été élaborée avec un module de tomographie de capacitance électrique et une boucle d’essais hydrauliques déjà éprouvés. Cette technique est en cours d’adaptation au prototype de tomographie d’impédance électrique rapide et en amélioration grâce à l’inclusion des régimes d’écoulements verticaux. En parallèle, une méthode de reconstruction d’image a été développée, basée sur l’algorithme NOSER et un postulat pseudo-2D. L’analyse des images reconstruites à partir d’un set d’expériences de référence procure un aperçu des avantages et des défauts de la méthode et du prototype.
Fichier principal
Vignette du fichier
these.pdf (21.22 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)

Dates et versions

tel-01656977 , version 1 (06-12-2017)

Identifiants

  • HAL Id : tel-01656977 , version 1

Citer

Antoine Dupre. Electrical impedance tomography for void fraction measurements of harsh two-phase flows : prototype development and reconstruction techniques. Fluids mechanics [physics.class-ph]. Ecole Centrale Marseille, 2017. English. ⟨NNT : 2017ECDM0005⟩. ⟨tel-01656977⟩

Collections

CEA STAR
577 Consultations
57 Téléchargements

Partager

Gmail Facebook X LinkedIn More