An improved combination of tensile strength and ductility in titanium alloys via oxygen ordering
Abstract
Oxygen content has always been limited in commercial titanium and titanium alloys due to its propensity to induce a severe ductility loss. Yet, its effect on the macroscopical behavior has never been clearly understood and is still rather unclear considering the wide variability in the literature results. Here, we investigate the tensile properties of α-titanium with oxygen contents ranging from 0.15 to 0.80 weight percent (wt%). While the strain-hardening ability of oxygen is maintained, no ductility drop is observed up to 0.60 wt% of oxygen, thus allowing exceptional combinations of mechanical properties with an ultimate tensile strength (UTS) of 800 MPa and 29% of elongation at fracture for the Ti-0.6O alloy. Both high strength and ductility of these alloys result from the dislocations/precipitate's interactions. It is proposed that these interactions induce an important cross-slip activity responsible for a dislocation multiplication and a high work-hardening rate. With the addition of Zr, alloys exhibit an even more promising combination of mechanical properties, achieving 1,075 MPa of UTS and 28% of elongation at fracture for the Ti-4.5Zr-0.8O alloy. The mechanical properties of TiO and TiZrO alloys brought out in this study surpass those of Ti-6Al-4V alloy and open significant prospects for developing a new generation of oxygen-tolerant titanium alloys.