Skip to Main content Skip to Navigation
Journal articles

SHS synthesis, SPS densification and mechanical properties of nanometric tungsten

Abstract : Recent studies have shown that low grain sizes are favorable to improve ductility and machinability in tungsten, as well as a resistance to ablation and spallation, which are key properties for the use of this material in a thermonuclear fusion environment (Tokamaks such as ITER). However, as one of the possible incidents during Tokamak operation is the leakage of air or water from the cooling system inside the chamber, resulting in the so-called loss of vacuum accident (LOVA), extensive oxidation may arise on tungsten components, and the use of an alloy with improved oxidation resistance is therefore highly desirable. As current production routes are not suitable for the fabrication of bulk nanostructured tungsten or tungsten alloys samples, we have proposed a new methodology based on powder metallurgy, including the powder synthesis, the densification procedure, and preliminary mechanical testing, which was successfully applied to pure tungsten. A similar study is hereby presented on tungsten-chromium alloys with up to 6 wt.% Cr. Results show that full tungsten densification may be obtained by SPS at a temperature lower than 1600 °C. The resulting morphology strongly depends on the amount of the alloying element, presenting a possible second phase of chromium oxide, but always keeps a partial nanostructure inherited from the synthesized powders. Such microstructure had previously been identified as being favorable to the use of these materials in fusion environments and for improved mechanical properties, including hardness, yield strength and ductility, all of which is confirmed by the present study.
Document type :
Journal articles
Complete list of metadata

https://hal-cea.archives-ouvertes.fr/cea-03142396
Contributor : Serge Palacin <>
Submitted on : Tuesday, February 16, 2021 - 7:10:26 AM
Last modification on : Wednesday, May 19, 2021 - 2:26:03 PM
Long-term archiving on: : Monday, May 17, 2021 - 6:24:46 PM

File

Metals11_252.pdf
Publisher files allowed on an open archive

Licence


Distributed under a Creative Commons Attribution 4.0 International License

Identifiers

Citation

Sarah Dine, Elodie Bernard, Nathalie Herlin, Christian Grisolia, David Tingaud, et al.. SHS synthesis, SPS densification and mechanical properties of nanometric tungsten. Metals, MDPI, 2021, 11, pp.252. ⟨10.3390/met11020252⟩. ⟨cea-03142396⟩

Share

Metrics

Record views

212

Files downloads

108