Optimization of minor actinides bearing blankets with industrial fuel cycle constraints
Résumé
Heterogeneous minor actinides transmutation is the process of loading neptunium, americium and curium
in dedicated targets, generally located at the core periphery, in order to transmute these long-lived
heavy nuclides into shorter-lived fission products. This has a positive effect on long-term radiotoxicity of
the spent fuel and on the short to medium term decay heat of the final waste packages. However, given
their location at the core periphery in a low flux zone, these targets are generally loaded with a high content
in minor actinides in order to maintain acceptable transmutation performances. A significant part of
the heavy nuclides produced by capture during irradiation being energetic alpha-emitters or strong neutron
emitters, this leads to a very high activity in the irradiated targets which has negative impacts on the
fuel cycle. In this paper, an optimization methodology of heterogeneous minor actinides transmutation is
applied to the fuel cycle case in order to assess the constraints limiting transmutation. It appears that
transportation of the fresh assemblies is the first limiting criterion due to the high decay heat of
241Am. Sodium washing at the end of irradiation is the second limiting criterion. It is shown that the geometrical
design on the target assembly is not a concern considering the current limitations on the fuel
cycle. It is also shown that using current industrial limitations and plutonium feed, it is not possible to
achieve equilibrium between production of americium in the core and consumption in the blankets. It
appears then that research should focus on the removal of fuel reprocessing limitations rather than standard
assembly optimization.