A. Zaetta, B. Fontaine, P. Sciora, R. Lavastre, M. Pelletier et al., Core with Adding DOppleR effect" CONCEPT, 515 Application to Sodium Fast Reactors

S. Kondo, K. Morita, Y. Tobita, K. Kamiyama, D. Brear et al., SIMMER-III: A computer program for LMFR core disruptive accident analysis, PNC ZN9410 96-207

L. Luck and C. Bell, The case of integral core -disruptive accident analysis, ANS/ENS Fast Reactor Safety Meeting, p.21

F. Martin,

B. Iooss, F. Gaudier, M. Marques, B. Spindler, and B. Tourniaire, Uncertainty 525 assessment in severe nuclear accident scenarios, First International Conference on Advances in System Simulation, pp.94-99, 2009.

R. Nakai, T. Suzuki, H. Yamano, H. Seino, and H. Ishikawa, Development of Severe Accident Evaluation Technology (Level 2 PSA) for Sodium-cooled Fast Reactor (1) Overview of evaluation Methodology Development, vol.09, p.530

J. Tokyo, , 2009.

H. Yamano, I. Sato, and Y. Tobita, Development of technical basis in the initiating and transition phases of unprotected events for Level-2 PSA methodology in sodium-cooled fast reactors, Nuclear Engineering and Design, vol.249, pp.212-227, 2012.

L. Ravi, K. Velusamy, and P. Chellapandi, A robust thermal model to investigate radial propagation of core damage due to total instantaneous blockage in SFR fuel assembly, Annals of Nuclear Energy, vol.62, pp.342-356, 2013.

J. Droin, N. Marie, A. Bachrata, F. Bertrand, E. Merle et al., Physical tool for unprotected Loss Of Flow transient in a Sodium fast, p.540
URL : https://hal.archives-ouvertes.fr/hal-01582900

. Reactor, Annals of Nuclear Energy, vol.106, pp.195-210, 2017.

J. Droin, N. Marie, F. Bertrand, E. Merle-lucotte, and J. Seiler, Analytical modelling of the primary phase of an unprotected loss of flow, NURETH-16, 2015.

K. Herbreteau, N. Marie, F. Bertrand, J. Seiler, and P. Rubiolo, Sodiumcooled fast reactor pim model for predicting pin failure during a power excursion, Nuclear Engineering and Design, vol.335, pp.279-290, 2018.

X. Manchon, F. Bertrand, N. Marie, M. Lance, and D. Schmitt, Modeling and analysis of molten fuel vaporization and expansion for a sodium fast reactor 550 severe accident, Nuclear Engineering and Design, vol.322, pp.522-535, 2017.

N. Marie, A. Marrel, J. Seiler, and F. Bertrand, Physico-statistical approach to assess the core damage variability due to a total instantaneous blockage of SFR fuel sub-assembly, Nucl. Eng. Des, vol.293, pp.343-353, 2015.

G. Kayser, J. Charpenel, and C. Jamond, Synthesis of SCARABEE-N program, 555 withmain results and application to the total instantaneous blockage reactor, Nucl. Eng. Des, vol.128, pp.144-185, 1998.

J. Papin, R. Sesny, P. Soussan, and J. M. Dougall, The SCARABEE total blockages test serie: synthesis of the interpretation., 7th international fast reactor safety meeting, Am. Nucl. Soc, vol.1, pp.367-376

D. So and J. Seiler, Sodium boiling, dry out and clad melting in a subassembly of LMFBR during a total and instantaneous inlet blockage accident, Proceedings of the 11th Liquid Metal Boiling Working Group, 1984.

J. Papin, Behavior of fast reactor fuel during transient and accident condi

J. Papin and J. Seiler, Synthesis of clad motion experiments interpretation: codes and validation, Proceedings of the 2nd International Topical Meeting on Nuclear Reactor Thermal Hydraulics

J. , , pp.11-14, 1983.

L. Bernaz, Investigation of natural convection heat transfer to the cooled top boundary of a heated pool, Proceedings of the 9th Topical International Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-9, pp.3-9, 1984.

D. Alvarez, P. Malterre, and J. Seiler, Natural Convection in, vol.Heated, p.575

, Liquid Pools The BAFOND Experiments: Proposal for New Correlations, Science and Technology of Fast Reactor Safety, BNES

M. Bede, C. Perret, H. Pretrel, and J. Seiler, One component, volume heated, boiling pool thermohydraulics, Proceedings of the 6th Topical International Meeting on Nuclear Reactor Thermal-Hydraulics

B. Duret and J. Bonnard, Crust instability criteria during transient freezing on anliquid film, Proceedings of the ASME Winter Annual Meeting, 1988.

M. Mckay, R. Beckman, and W. Conover, A comparison of three methods for 585 selecting values of input variables in the analysis of output from a computer code, Technometrics, vol.21, pp.239-245, 1979.

G. Damblin, M. Couplet, and B. Iooss, Numerical studies of space filling designs: Optimization of Latin hypercube samples and subprojection properties, Journal of Simulation, vol.7, pp.276-289, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00848240

A. Marrel, N. Marie, and M. D. Lozzo, Advanced surrogate model and sensitivity analysis methods for sfr accident assessment, Reliability Engineering & System Safety, vol.138, p.232241, 2015.

K. Fang, Wrap-around L 2 -discrepancy of random sampling, Latin hypercube and uniform designs, Journal of Complexity, vol.17, pp.608-624, 2001.

E. Parzen, On estimation of a probability density function and mode, The Annals of Mathematical Statistics, vol.33, issue.3, pp.1065-1076, 1962.

A. Saltelli, Sensitivity analysis for importance assessment, Risk Analysis, vol.22, pp.1-12, 2002.

I. Sobol, Sensitivity estimates for non linear mathematical models, Math-600 ematical Modelling and Computational Experiments, vol.1, pp.407-414, 1993.

K. Fang, R. Li, and A. Sudjianto, Design and modeling for computer experiments, 2006.

J. Sacks, W. Welch, T. Mitchell, and H. Wynn, Design and analysis of computer experiments, Statistical Science, vol.4, pp.409-435, 1989.

C. Rasmussen and C. Williams, Gaussian processes for machine learning, 2006.

A. Marrel, B. Iooss, F. Van-dorpe, and E. Volkova, An efficient methodology for modeling complex computer codes with Gaussian processes, Computational Statistics and Data Analysis, vol.52, pp.4731-4744, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00239492