G. P. Tilly and J. Jacobs, CONREPNET -Concrete repairs -Performance in service and current practice, 2007.

A. Bentur, S. Diamond, and N. S. Berke, Steel corrosion in concrete -Fundamentals and civil engineering practice, E&FN SPON, 1997.

J. P. Broomfield, Corrosion of steel in concrete -Understanding, investigation and repair, E&FN SPN, 1997.

L. Bertolini, B. Elsener, P. Pedeferri, and R. Polder, Corrosion of steel in concrete: prevention, diagnosis, repair, 2004.

S. Audisio, G. Béranger, and V. Bouteiller, Anticorrosion et durabilité dans le bâtiment, le génie civil et les ouvrages industriels ; Chapitre 18 Les traitements électrochimiques pour la réhabilitation du béton armé dégradé, Presses Polytechniques et Universitaires, 2010.

A. Raharinaivo, G. Arliguie, T. Chaussadent, G. Grimaldi, V. Pollet et al., La corrosion et la protection des aciers dans le béton, Presses de l'école nationale des Ponts et Chaussées, 1998.

F. Biondini and D. M. Frangopol, Lifetime reliability-based optimization of reinforced concrete crosssections under corrosion, Structural Safety, pp.483-489, 2009.

H. Song, S. Pack, and K. Y. Ann, Probabilistic assessment to predict the time to corrosion of steel in reinforced concrete tunnel box exposed to sea water, Construction and Building Materials, vol.23, pp.3270-3278, 2009.

V. Baroghel-bouny, G. Villain, M. Thiéry, and T. Chaussadent, Durabilité du béton armé et de ses constituants : maîtrise et approche perfomantielle, Etudes et recherches des laboratoires des ponts et chaussées, 2008.

C. Alonso, C. Andrade, M. Castellote, and P. Castro, Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar, vol.30, pp.1047-1055, 2000.

M. A. Pech-canul and P. Castro, Corrosion measurements of steel reinforcement in concrete exposed to a tropical marine atmosphere, vol.32, pp.491-498, 2002.

U. M. Angst, B. Elsener, C. K. Larsen, and Ø. Vennesland, Chloride induced reinforcement corrosion: Electrochemical monitoring of initiation stage and chloride threshold values, Corrosion Science, vol.53, pp.1451-1464, 2011.

C. Cremona, L. Adélaide, Y. Berthaud, V. Bouteiller, V. Hostis et al., Probabilistic and predictive performance-based approach for assessing reinforced concrete structures lifetime: The applet project, AMP 2010 -International Workshop on Ageing Management of Nuclear Power Plants and Waste Disposal Structures, vol.334, 2011.
URL : https://hal.archives-ouvertes.fr/cea-01272795

V. Bouteiller, C. Cremona, V. Baroghel-bouny, and A. Maloula, Corrosion initiation of reinforced concretes based on Portland or GGBS cements: Chloride contents and electrochemical characterizations versus time, vol.42, pp.1456-1467, 2012.

C. Q. Li, Life-cycle modelling of corrosion-affected concrete structures: propagation, Journal of Structural Engineering, vol.129, pp.753-761, 2003.

S. Ahmad, Reinforcement corrosion in concrete structures, its monitoring and service life prediction--a review, vol.25, pp.459-471, 2003.

V. Bouteiller, J. Cherrier, V. Hostis, N. Rebolledo, C. Andrade et al., European Journal of Environmental and Civil Engineering, vol.16, pp.471-480, 2012.

N. F. Afnor and . En, 206-1 / P18-325-1. Béton : spécification, performances, production et conformités, in, 2004.

H. S. So and S. G. Millard, On-site measurements on corrosion rate of steel in reinforced concrete, ACI Materials Journal, vol.104, pp.638-642, 2007.

M. Stern and A. L. Geary, Electrochemical polarization. I -A theoretical analysis of the shape of polarization curves, Journal of Electrochemical Society, vol.104, pp.56-65, 1957.

C. Andrade and J. A. González, Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements, Werkstoffe und Korrosion, vol.29, pp.515-519, 1978.

C. Andrade and C. Alonso, RILEM TC 154-EMC:Electrochemical Techniques for Measuring Metallic Corrosion -Recommendations -Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method, Materials and Structures, vol.37, pp.623-643, 2004.

. Nf and . Iso, Corrosion of metals and alloys -Removal of corrosion products from corrosion test specimens, vol.8407, 2002.

D. Neff, S. Reguer, L. Bellot-gurlet, P. Dillmann, and R. Berthelon, Structural characterization of corrosion products on archaeological iron. An integrated analytical approach to establish corrosion forms, Journal Raman Spectroscopy, vol.35, pp.739-745, 2004.

C. Andrade and A. Castillo, Evolution of reinforcement corrosion due to climatic variations, Materials and Corrosion, vol.54, pp.379-386, 2003.

C. Andrade, C. Alonso, and J. Sarria, Corrosion rate evolution in concrete structures exposed to the atmosphere, Cement and Concrete Composites, vol.24, pp.55-64, 2002.

K. Bhargava, A. K. Ghosh, Y. Mori, and S. Ramanujam, Modeling of time to corrosion-induced cover cracking in reinforced concrete structures, vol.35, pp.2203-2218, 2005.

D. Neff, J. Harnisch, B. Beck, V. Hostis, J. Goebbels et al., Morphology of corrosion products of steel in concrete under macrocell and self-corrosion conditions, Materials and Corrosion, vol.62, pp.861-871, 2011.

V. Hostis, E. Amblard, W. Guillot, C. Paris, and L. Bellot-gurlet, Characterisation of the steel concrete interface submitted to chloride-induced-corrosion, Materials and Corrosion, vol.64, pp.185-194, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01544783