S. S. Leong, A. Jia, Y. W. Yee, and W. F. Edith, Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs, J. Orthop. Res, vol.34, p.369, 2015.

S. Singh, S. Ramakrishna, and R. Singh, Material issues in additive manufacturing: A review, J. Manuf. Process, vol.25, p.185, 2017.

X. Lou, M. Song, P. W. Emigh, M. A. Othon, and P. L. Andresen, On the stress corrosion crack growth behaviour in high temperature water of 316L stainless steel made by laser powder bed fusion additive manufacturing, Corros. Sci, vol.128, p.140, 2017.

X. Lou, P. L. Andresen, and R. B. Rebak, Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior, J. Nucl. Mater, vol.499, p.182, 2018.

T. Niendorf, S. Leuders, A. Riemer, H. A. Richard, T. Tröster et al., Highly anisotropic steel processed by selective laser melting, Metall. Mater. Trans. B, vol.44, p.794, 2013.

K. Saeidi, X. Gao, Y. Zhong, and Z. J. Shen, Hardened austenite steel with columnar sub-grain structure formed by laser melting, Mater. Sci. Eng. A, vol.625, p.221, 2015.

D. Kong, X. Ni, C. Dong, L. Zhang, C. Man et al., Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells, Electrochim. Acta, vol.276, p.293, 2018.

T. Vilaro, C. Colin, J. D. Bartout, L. Nazé, and M. Sennour, Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy, Mater. Sci. Eng. A, vol.534, p.446, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00675998

M. Zie-tala, T. Durejko, M. Polanski, I. Kunce, T. P?ocinski et al., The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping, Mater. Sci. Eng. A, vol.677, p.1, 2016.

E. Liverani, S. Toschi, L. Ceschini, and A. Fortunato, Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel, J. Mater. Process. Technol, vol.249, p.255, 2017.

A. Leicht, U. Klement, and E. Hryha, Effect of build geometry on the microstructural development of 316L parts produced by additive manufacturing, Mater. Charact, vol.143, p.137, 2018.

P. Köhnen, C. Haase, J. Bültmann, S. Ziegler, J. H. Schleifenbaum et al., Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel, Mater. Des, vol.145, p.205, 2018.

T. Kurzynowski, K. Gruber, W. Stopyra, B. Kuznicka, and E. Chlebus, Correlation between process parameters, microstructure and properties of 316L stainless steel processed by selective laser melting, Mater. Sci. Eng. A, vol.718, p.64, 2018.

D. Tomus, Y. Tian, P. A. Rometsch, M. Heilmaier, and X. Wu, Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting, Mater. Sci. Eng. A, vol.667, p.42, 2016.

A. Puichaud, EPJ Nuclear Sci. Technol, vol.5, p.9, 2019.

Z. Wang, T. A. Palmer, and A. M. Beese, Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing, Acta Mater, vol.110, p.226, 2016.

N. P. Lavery, J. Cherry, S. Mehmood, H. Davies, B. Girling et al., Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion, Mater. Sci. Eng. A, vol.693, p.186, 2017.

A. Riemer, S. Leuders, M. Thöne, H. A. Richard, T. Tröster et al., On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting, Eng. Fract. Mech, vol.120, p.15, 2014.

J. A. Cherry, H. M. Davies, S. Mehmood, N. P. Lavery, S. G. Brown et al., Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting, Int. J. Adv. Manuf. Technol, vol.76, p.869, 2015.

A. A. Deev, P. A. Kuznetcov, and S. N. Petrov, Anisotropy of mechanical properties and its correlation with the structure of the stainless steel 316L produced by the SLM method, Phys. Procedia, vol.83, p.789, 2016.

R. Casati, J. Lemke, and M. Vedani, Microstructure and fracture behavior of 316L austenitic stainless steel produced by selective laser melting, J. Mater. Sci. Technol, vol.32, p.738, 2016.

R. L. Carr, Evaluating flow properties of solids, Chem. Eng, vol.72, p.163, 1965.

D. Mcglinchey, Bulk solids handling: equipment selection and operation, 2008.

, Design and Construction Rules for Mechanical Components of the FBR Nuclear Installations, 2007.

D. Pfoertsch and C. Ruud, , pp.33-0397, 1983.

A. Röttger, K. Geenen, M. Windmann, F. Binner, and W. Theisen, Comparison of microstructure and mechanical properties of 316L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material, Mater. Sci. Eng. A, vol.678, p.365, 2016.

L. Cea and . Technologie-des-rnr-na, , p.276, 2014.

G. Was, Fundamentals of radiation materials science: metals and alloys, 2017.

H. D. Carlton, A. Haboub, G. F. Gallegos, D. Y. Parkinson, and A. A. Macdowell, Damage evolution and failure mechanisms in additively manufactured stainless steel, Mater. Sci. Eng. A, vol.651, p.406, 2016.

W. Shifeng, L. Shuai, W. Qingsong, C. Yan, Z. Sheng et al., Effect of molten pool boundaries on the mechanical properties of selective laser melting parts, J. Mater. Process. Technol, vol.214, p.2660, 2014.

M. Montero-sistiaga, S. Nardone, C. Hautfenne, and J. Van-humbeeck, Effect of heat treatment of 316L stainless steel produced by selective laser melting (SLM), Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium À An Additive Manufacturing Conference, pp.558-565, 2016.

J. Suryawanshi, K. G. Prashanth, and U. Ramamurty, Mechanical behavior of selective laser melted 316L stainless steel, Mater. Sci. Eng. A, vol.696, p.113, 2017.

R. M. Horn, M. Connor, D. Webber, J. Jackson, and F. Bolger, Evaluation of additively manufactured materials for nuclear plant components, Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems À Water Reactor, pp.1009-1020, 2018.

Y. M. Wang, T. Voisin, J. T. Mckeown, J. Ye, N. P. Calta et al.,

M. K. Ott, P. J. Santala, M. J. Depond, A. V. Matthews, T. Hamza et al., Additively manufactured hierarchical stainless steels with high strength and ductility, Nat. Mater, vol.17, p.63, 2018.

R. Noel, The new code "RCC-MR" À Rules for design and construction of LMFBR components, Nucl. Eng. Des, vol.98, p.297, 1987.

A. Puichaud, C. Flament, A. Chniouel, F. Lomello, E. Rouesne et al., Microstructure and mechanical properties relationship of additively manufactured 316L stainless steel by selective laser melting, EPJ Nuclear Sci. Technol, vol.5, p.23, 2019.
URL : https://hal.archives-ouvertes.fr/cea-02458434