L. San-felice, Experimental validation of the DARWIN2.3 package for fuel cycle applications, Nucl. Technol, vol.184, p.217, 2013.

A. Santamarina, APOLLO2.8: a validated code package for PWR calculations, Proc. Int. Conf. Advances in Nuclear Fuel Management IV, 2009.

A. Tsilanizara, DARWIN: an evolution code system for a large range of applications, Proc. Int. Conf. ICRS-9, 1999.

A. Santamarina, The JEFF-3.1.1 Nuclear Data library, JEFF report, vol.22, 2009.
URL : https://hal.archives-ouvertes.fr/cea-02386210

C. De-saint and . Jean, Status of CONRAD, a nuclear reaction analysis tool, Proc. Int. Conf. Nuclear Data for Science and Technology, 2007.

P. Archier, CONRAD evaluation code: development status and perspectives, Proc. Int. Conf. Nuclear Data for Science and Technology, 2013.

A. Rizzo, Work plan for improving the DARWIN2.3 depleted material balance calculation of nuclides of interest for the fuel cycle, EPJ Web Conf, vol.146, p.9030, 2017.
URL : https://hal.archives-ouvertes.fr/cea-02415675

A. Rizzo, Nuclear data Adjustment based on the interpretation of post-irradiation experiments with the DARWIN2.3 package, EPJ Nuclear Sci. Technol, vol.4, p.47, 2018.
URL : https://hal.archives-ouvertes.fr/cea-02304306

A. Rizzo, Assessment of the 153 Eu and 154 Eu neutron capture cross sections from the Integral Data Assimilation of used nuclear fuel experiments, Ann. Nucl. Energy, vol.124, p.524, 2019.

C. Bastian, AGS, a computer code for uncertainty propagation in time-of-flight cross-section data, Proc. Int. Conf. PHYSOR, 2006.

B. Habert, Retroactive generation of covariance matrix of nuclear model parameters using marginalization techniques, Nucl. Sci. Eng, vol.166, p.276, 2010.

G. Noguere, Zero variance penalty model for the generation of covariance matrices in integral data assimilation problems, Nucl. Sci. Eng, vol.172, p.164, 2012.

E. Privas, Generation of 238 U covariance matrices by using the integral data assimilation technique of the CONRAD code, EPJ Web Conf, vol.106, p.4015, 2016.

I. C. Gauld, Uncertainties in predicted isotopic compositions for high burnup PWR spent nuclear fuel, 2010.

E. Brun, TRIPOLI-4 ® , CEA, EDF, and AREVA reference Monte Carlo code, Ann. Nucl. Energy, vol.82, p.151, 2015.

M. Ouisloumen, A model for neutron scattering off heavy isotopes that accounts for thermal agitation effects, Nucl. Sci. Eng, vol.107, p.189, 1991.

V. Vallet, Deterministic approach of the decay heat uncertainty due to JEFF-3.1.1 nuclear data uncertainties with the CYRUS tool and the DARW IN2. 3 depletion code, Proc. Int. Conf. PHYSOR, Kyoto, 2014.

P. Archier, COMAC À Nuclear data covariance matrices library for reactor applications, Proc. Int. Conf. PHYSOR, Kyoto, 2014.

N. Terranova, Covariance Evaluation for Nuclear Data of Interest to the Reactivity Loss Estimation of the Jules Horowitz Reactor, 2016.

D. Bernard, Validation of actinides nuclear cross section using pile-oscillation experiments performed at MINERVE facility, J. Korean Phys. Soc, vol.59, p.1119, 2011.

P. Leconte, OSMOSE programme: validation of actinides nuclear data for LWR applications, JEFDOC-1502, 2013.

P. Leconte, Feedback on 239 Pu and 240 Pu nuclear data and associated covariances through the CERES integral experiments, J. Nucl. Sci. Technol, vol.52, p.1044, 2015.

A. , Interpretation of fission products oscillations in the MINERVE reactor, from thermal to epithermal spectra, Nucl. Sci. Eng, vol.169, p.229, 2011.

P. Leconte, MAESTRO: an ambitious experimental programme for the improvement of nuclear data of structural, detection, moderating, and absorbing materials À first results for nat V, 55 Mn, 59 Co, and 103 Rh, Proc. Int. Conf. ANIMMA, 2013.

P. Leconte, Thermal neutron activation experiments on Ag, EPJ Web Conf, vol.111, p.7001, 2016.

P. Leconte, Nuclear data feedback on structural, moderating and absorbing materials through the MAESTRO experimental programme, JEFDOC-1849, 2017.

D. Bernard, Validation of JEFF-3.1.1 thermal and epithermal induced capture cross sections through MELU-SINE experiment analysis, Nucl. Sci. Eng, vol.179, p.302, 2015.

J. Lebrat, JEFF-3.1.1 nuclear data validation for sodium fast reactors, J. Nucl. Sci. Technol, vol.48, p.620, 2011.

J. Lerendegui-marco, Radiative neutron capture of 242 Pu in the resonance region at the CERN n_TOF-EAR1 facility, Phys. Rev. C, vol.97, p.24605, 2018.

E. Mendoza, Measurement and analysis of the 243 Am neutron capture cross section at the n_TOF facility at CERN, Phys. Rev. C, vol.90, p.36608, 2014.
URL : https://hal.archives-ouvertes.fr/in2p3-01074669

G. Leinweber, Europium resonance parameters from neutron capture and transmission measurements in the energy range 0.01-200 eV, Ann. Nucl. Energy, vol.69, p.74, 2014.

C. Schmitt, Fission yield at different fission-product kinetic energies for thermal-neutron-induced fission on 239 Pu, Nucl. Phys. A, vol.940, p.21, 1984.

A. Rizzo, EPJ Nuclear Sci. Technol, vol.5, p.24, 2019.

A. Bail, Mesures de rendements isobariques et isotopiques des produits de fission lourds sur le spectrumètre de masse Lohengrin, 2009.

Y. Gupta, Fission fragment yield distribution in the heavy-mass region from the 239 Pu(n th , f) reaction, Phys. Rev. C, vol.96, p.14608, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01582780

L. Leal, Nuclear data evaluation work at IRSN, JEFDOC-1832, 2017.

A. Santamarina and D. Bernard, Re-estimation of nuclear data and reliable covariances using integral experiments. Application to JEFF3 library, Proc. Int. Conf. on Mathematicals & Computational methods applied to nuclear science and engineering, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02419691

S. E. Skutnik, Proposed re-evaluation of the 154 Eu thermal (n, g) capture cross-section based on spent fuel nuclear benchmarking studies, Ann. Nucl. Energy, vol.99, p.80, 2017.

, JEFF-3.3 nuclear data library, 2018.

G. Noguere, New resonance parameters shape analysis of the 1 st resonance of Pu240 for thermal reactor applications, p.1526, 2013.

G. Noguere and P. H. Doan, Progress report on 154 Eu buildup for DARWIN applications, JEFDOC-1592, 2014.