Z. Yao, J. J. Stiglich, and T. S. Sudarshan, Molybdenum silicide based materials and their properties, J. Mater. Eng. Perform, vol.8, pp.291-304, 1999.

S. Park and R. H. Baney, Thermal oxidation of Electron Beam Evaporator Deposited Aluminum Films on Zircaloy and Hydrothermal Reactions in Subcritical Aqueous Conditions, Abstract 74, 204th Meeting, 2003.

R. Hui, W. Cook, C. Sun, Y. Xie, P. Yao et al., Deposition, characterization and performance evaluation of ceramic coatings on metallic substrates for supercritical water-cooled reactors, Surf. Coating. Technol, vol.205, pp.3512-3519, 2011.

S. Park, Amorphous alumina oxidation protective coatings for Zircaloy based on a compositional gradient layer system, Proceedings 39 th International Conference on Metallurgical Coatings and Thin Films, 2012.

A. , , pp.23-27

H. Kim, I. Kim, J. Park, and Y. Koo, Application of Coating Technology on Zirconium-based Alloy to Decrease High-temperature Oxidation, Zirconium in the Nuclear Industry, 17th International Symposium, Hyderbad, Andhra Pradesh, 2007.

J. Park, I. Kim, Y. Jung, H. Kim, D. Park et al., High temperature steam oxidation of Al3Ti-based alloys for the oxidation-resistant surface layer on Zr fuel claddings, J. Nucl. Mater, vol.437, pp.75-80, 2013.

K. A. Terrani, C. M. Parish, D. Shin, and B. A. Pint, Protection of zirconium by alumina-and chromia-forming iron alloys under high-temperature steam exposure, J. Nucl. Mater, pp.64-71, 2013.

S. Mato, G. , M. Brizuela, R. E. Galindo, F. J. Erez et al., Long -term high temperature oxidation of CrAl(Y)N coatings in steam atmosphere, Corrosion Sci, vol.80, pp.1-153, 2013.

A. T. Nelson, E. S. Sooby, Y. Kim, B. Cheng, and S. A. Maloy, High temperature oxidation of molybdenum in water vapor environments, J. Nucl. Mater, vol.448, pp.441-447, 2013.

V. Avincola, High Temperature Steam Performance of Coatings for Zircaloy, 20th International Quench Workshop, 2014.

H. Kim, I. Kim, Y. Jung, D. Park, J. Park et al., Microstructure and mechanical strength of surface ODS treates Zircaloy-4 sheet using laser beam scanning, Nuc. Eng. and Tech, vol.46, issue.4, 2014.

A. S. Kuprin, V. A. Belous, V. N. Voyevodin, V. V. Bryk, R. L. Vasilenko et al., High temperature air oxidation of E110 and Zr-1Nb alloys claddings with ISSN, pp.126-133, 2014.

C. Tang, Oxidation Resistant Coatings for Zircaloy Cladings to Be Used in Nuclear Industry, 2015.

B. K. Choi, Y. Jung, H. G. Kim, I. H. Kim, Y. Koo et al., Zirconium Alloy with Coating Layer Containing Very High Temperature Oxidation Resistant Material Such as Y2O3, Si02, ZrO2, Cr2O3, Al2O3, Cr3C2, SiC, ZrC,ZrN, Si and Cr

I. Idarraga-trujillo, M. L. Flem, J. C. Brachet, M. L. Saux, D. Hamon et al., Assessment at CEA of Coated Nuclear Fuel Cladding for LWRS with Increased Margins in LOCA and beyond LOCA Conditions, 2013.

J. C. Brachet, C. Lorrette, A. Michaux, C. Sauder, I. Idarraga-trujillo et al., CEA Studies on Advanced Nuclear Fuel Claddings for Enhanced Accident Tolerant LWRs Fuel (LOCA and beyond LOCA Conditions), Fontevraud 8-Contribution of Materials Investigations and Operating Experience to LWRs' Safety, Performance and ReliabilityFrance, 2014.

J. C. Brachet, A. Billard, F. Shuster, M. L. Flem, I. Idarraga-trujillo et al., Gaines de combustible nucl eaire, proc ed es de fabrication et utilisation contre l'oxydation

J. C. Brachet, M. L. Saux, T. Guilbert, S. Urvoy, E. Rouesne et al., Chromium Coated Nuclear Fuel Claddings for Enhanced Accident Tolerant LWRs Fuel (DBA-LOCA and Slightly beyond DBA-LOCA Conditions), IAEA Technical Meeting on "Accident Tolerant Fuel Concepts for LWRs, 2014.

J. C. Brachet, M. L. Saux, M. L. Flem, S. Urvoy, E. Rouesne et al., On Going Studies at CEA on Chromium Coated Zirconium Based Nuclear Fuel Claddings for Enhanced Accident Tolerant LWR's Fuel, 2015.

?. S. Kuprin, V. ?. Belous, V. N. Voyevodin, V. V. Bryk, R. L. Vasilenko et al., Vacuum-arc chromium-based coatings for protection of zirconium alloys from the hightemperature oxidation in air, J. Nucl. Mater, vol.465, pp.400-406, 2015.

H. Kim, I. Kim, Y. Jung, D. Park, J. Park et al., Adhesion property and high-temperature oxidation behavior of Cr coated Zircaloy-4 cladding tube prepared by 3D laser coating, J. Nucl. Mater, vol.465, pp.531-539, 2015.

V. V. Bryk, V. N. Voyevodin, I. M. Neklyudov, and A. N. Rakitskij, Microstructure investigation of Cr and Cr alloys irradiated with heavy ions, J. Nucl. Mater, vol.225, pp.146-153, 1995.

M. Biget, F. Maury, P. Vajda, A. Lucasson, and P. Lucasson, Atomic displacement in low temperature irradiated chromium crystals, J. Phys, vol.40, pp.293-298, 1979.

C. W. Weaver, Irradiation and the ductility of chromium, Scripta Metall, vol.2, pp.463-466, 1968.

V. Chakin, V. Kazakov, Y. Goncharenko, and Z. Ostrovsky, Formation of the aphase in Cr-Fe alloys under irradiation, J. Nucl. Mater, vol.233, issue.237, pp.573-576, 1996.

A. Jain, S. Loganathan, J. D. Kanjilal, and G. K. Mehta, High energy heavy ion irradiation of chromium films, Vacuum, vol.46, pp.369-371, 1995.

W. Z. Li, H. Kheurandish, Z. Al-tamimi, and W. A. Grant, Cr þ ion irradiation and thermal annealing of chromium films on silicon for formation of silicides, Nucl. Inst. Meth. Phys. Res, vol.19, issue.20, pp.723-730, 1987.

R. Nagar, B. R. Mehta, J. P. Singh, D. Jain, V. Ganesan et al., Effect of swift heavy ion irradiation on the hardness of chromium nanorods, J. Vac. Sci. Technol, vol.26, issue.887, pp.887-892, 2008.

N. Kuratani, A. Ebe, K. Ogata, I. Shimizu, Y. Setsuhara et al., Fundamental study of ion irradiated effects on the columnar growth of chromium films prepared by ion-beam and vapor deposition, J. Vac. Sci. Technol, vol.153, pp.153-155, 2001.

R. Van-nieuwenhove, J. Balak, A. Toivonen, S. Pentiila, and U. Ehrnstern, Investigation of coatings ,applied by PVD, for the corrosion protection of materials in supercritical water, 2013.

R. Van-nieuwenhove, IFA-774: the First In-pile Test with Coated Fuel Rods, 2003.

R. Van-nieuwenhove, OECD Halden Reactor Project, IFA-774: the First In-pile Test with Coated Fuel Rods, 2014.

J. Ribis, A. Wu, J. C. Brachet, C. Toffolon-masclet, F. Barcelo et al., Atomicscale Interface Structure of Cr-coated Zircalloy-4 Alloy e to Be Published

S. Pellegrino, P. Trocellier, S. Miro, Y. Serruys, E. Bordas et al., The JANNUS Saclay facility: a new platform for materials irradiation, implantation and ion beam analysis, Nucl. Instrum. Meth. Phys. Res. B, vol.273, p.213, 2012.

R. E. Stoller, M. B. Toloczko, G. S. Was, A. G. Certain, S. Dwarraknath et al., On the use of SRIM for computing radiation damage exposure, Nucl. Instrum. Meth. Phys. Res. B, vol.310, pp.75-80, 2013.

X. Chen, W. Wolf, R. Podloucky, and P. , Ab initio study of ground state properties of the Laves phases compounds TiCr 2 , ZrCr 2 and HfCr 2, Phys. Rev. B, vol.71, 2005.

V. N. Shishov, Influence of neutron irradiation on dislocation structure and phase composition of Zr-Base alloys, Zirconium in the nuclear industry, 11th Symposium, pp.603-620, 1996.

J. J. Kai, W. I. Huang, and H. Y. Chou, The microstructural evolution of zircaloy-4 subjected to proton irradiation, J. Nucl. Mater, vol.170, pp.193-209, 1990.

N. A. Dubrovinskaia, L. S. Dubrovinsky, S. K. Saxcna, and B. Sundman, Thermal expansion of chromium (Cr) to melting temperature, Calphad, vol.21, issue.4, pp.497-508, 1997.

Z. Erdelyi, M. Sladecek, L. Stadler, I. Zizak, G. A. Langer et al., Transient interface sharpening in miscible alloys, Science, vol.306, 2004.

H. Wan, Y. Shen, X. Jin, Y. Chen, and J. Sun, Effects of coherency stress and vacancy sources/sinkson interdiffusion across coherent multilayer interfaces e Part II: interface sharpening and intermixing rate, Acta Mater, vol.60, pp.2539-2553, 2012.

Z. Erdelyi and D. L. Beke, Stress effects on diffusional interface sharpening in ideal binary alloys, Phy.l Rev. B, vol.68, p.92102, 2003.

A. P. Ehiasarian, J. G. Wen, and I. Petrov, Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion, J. Appl. Phys, vol.101, p.54301, 2007.

S. A. Dregria and P. Wynblatt, Equilibrium segregation and interfacial energy in multicomponent systems, Acta Metall. Mater, vol.39, issue.5, pp.71-778, 1991.

W. Xiang and S. Ying, Reaction Diffusion in Chromium-Zircaloy-2 System, China Nuclear Science and Technology Report, 2001.

G. Vogl, M. Sugimoto, and Y. Yoshida, High-temperature observations of the dynamics of small second phase particles leading to fast diffusion of iron in azirconium, J. Nucl. Mater, vol.199, pp.112-120, 1993.

C. Zhang, B. Li, and P. R. Norton, The segregation of Fe to a zirconium surface, J. Nucl. Mater, vol.223, pp.238-244, 1995.

C. Zhang, B. Li, and P. R. Norton, The segregation of Fe on the (1010) Zr surface, Surf. Sci, vol.338, pp.157-168, 1995.

R. A. Perez, H. Nakajima, and F. Dyment, Diffusion in a-Ti and Zr, Mater. Trans, vol.44, issue.1, pp.2-13, 2003.

A. D. King, G. M. Hood, and R. A. Holt, Fe-enhancement of self-diffusion in a-Zr, J. Nucl. Mater, vol.185, pp.174-181, 1991.

C. Toffolon-masclet, J. Brachet, and G. Jago, Studies of second phase particles in different zirconium alloys using extractive carbon replica and an electrolytic anodic dissolution procedure, J. Nucl. Mater, vol.305, pp.224-231, 2002.

R. A. Versaci and M. Ipohorski, Polytype structure of intermetallic precipitates in Zircaloy-4 alloys, J. Nucl. Mater, vol.80, pp.180-183, 1979.

J. B. Vander-sande and A. L. Bement, An investigation of second phase particles in Zircaloy-4 alloys, J. Nucl. Mater. s, vol.52, pp.115-118, 1974.

R. A. Versaci and M. Ipohorski, Composition of Zr(Fe,Cr) 2 -type precipitates in Zircaloy-2 and Zircaloy-4, J. Nucl. Mater, vol.116, pp.321-323, 1983.

W. J. Yang, R. P. Tucker, B. Cheng, and R. B. Adamson, Precipitates in Zircaloy: identification and the effect of irradiation and thermal treatment, J. Nucl. Mater, vol.138, pp.185-195, 1986.

N. Dupin, I. Ansara, C. Servant, C. Toffolon, C. Lemaignan et al., A thermodynamic database for zirconium alloys, J. Nucl. Mater, pp.287-295, 1999.

M. Griffiths, R. W. Gilbert, and G. J. Carpenter, Phase instability, decomposition and redistribution of intermetallic precipitates in Zircaloy-2 ans -4 during neutron irradiation, J. Nucl. Mater, vol.150, pp.53-66, 1987.

Y. Idrees, Z. Yao, M. A. Kirk, and M. R. Daymond, In situ study of defect accumulation in zirconium under heavy ion irradiation, J. Nucl. Mater, vol.433, pp.95-107, 2013.

L. M. Howe, D. Phillips, A. T. Motta, and P. R. Okamoto, Irradiation-induced phase transformations in zirconium alloys, Surf. Coating. Technol, vol.66, pp.411-418, 1994.

F. Lefebvre and C. Lemaignan, Heavy ion-induced amorphisation of Zr(Fe,Cr) 2 precipitates in Zircaloy-4, J. Nucl. Mater, vol.165, pp.122-127, 1989.

A. Arranz, Influence of the ion type on the ion beam mixing of Cr/Al interfaces, Appl. Surf. Sci, vol.258, pp.3264-3268, 2012.

Y. Cheng, M. Van-rossum, M. Nicolet, and W. L. Johnson, Influence of chemical driving forces in ion mixing of metallic bilayers, Appl. Phys. Lett, vol.45, p.185, 1984.

M. Milosavljevic, N. Stojanovi, D. Perusko, B. Timotijevi, D. Toprek et al., Ion irradiation induced AleTi interaction in nano-scaled Al/Ti multilayers, Appl. Surf. Sci, vol.258, pp.2043-2046, 2012.

W. Bolse, Mechanisms of ion beam induced atomic mixing in solids, Mater. Sci. Eng, vol.253, pp.194-201, 1998.