M. P. Lutz and P. J. ,

R. W. Monteiro and . Zimmerman, Inhomogeneous interfacial transition zone model for the bulk modulus of mortar, Cement and Concrete Research, vol.27, pp.1113-1122, 1997.

K. L. Scrivener, A. K. Crumbie, and P. Laugesen, The interfacial transition zone (ITZ) between cement paste and aggregate in concrete, Interface Science, vol.12, pp.411-421, 2004.

F. Lavergne, K. Sab, J. Sanahuja, M. Bornert, and C. Toulemonde, Investigation of the effect of aggregates' morphology on concrete creep properties by numerical simulations, Cement and Concrete Research, vol.71, pp.14-28, 2015.

J. P. Ollivier, J. C. Maso, and B. Bourdette, Advanced Cement Based Materials, vol.2, pp.30-38, 1995.

Z. Sun, E. J. Garboczi, and S. P. Shah, Modeling the elastic properties of concrete composites: Experiment, differential effective medium theory, and numerical simulation, Cement and Concrete Composites, vol.29, pp.22-38, 2007.

F. Bernard and S. Kamali-bernard, Numerical study of ITZ contribution on mechanical behavior and diffusivity of mortars, Computational Materials Science, vol.102, pp.250-257, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01161714

S. Caré and E. Hervé, Application of a n-phase model to the diffusion coefficient of chloride in mortar, Transport in Porous Media, vol.56, pp.119-135, 2004.

J. Zheng, H. S. Wong, and N. R. Buenfeld, Assessing the influence of ITZ on the steady-state chloride diffusivity of concrete using a numerical model, Cement and Concrete Research, vol.39, pp.805-813, 2009.

W. Dridi, Analysis of effective diffusivity of cement based materials by multi-scale modelling, Mater Struct, vol.46, pp.313-326, 2013.

B. Bary, N. Leterrier, E. Deville, and P. L. Bescop, Coupled chemo-transport-mechanical modelling and numerical simulation of external sulfate attack in mortar, Cement and Concrete Composites, vol.49, pp.70-83, 2014.

Z. Hashin, Thermoelastic properties of particulate composites with imperfect interface, Journal of the Mechanics and Physics of Solids, vol.39, pp.745-762, 1991.

H. L. Duan, X. Yi, Z. P. Huang, and J. Wang, A unified scheme for prediction of effective moduli of multiphase composites with interface effects. Part I: Theoretical framework, Mechanics of Materials, vol.39, pp.81-93, 2007.

J. Wang, H. L. Duan, Z. Zhang, and Z. P. Huang, An anti-interpenetration model and connections between interphase and interface models in particle-reinforced composites, International Journal of Mechanical Sciences, vol.47, pp.701-718, 1737.

H. Tan, Y. Huang, C. Liu, and P. H. Geubelle, The Mori-Tanaka method for composite materials with nonlinear interface debonding, International Journal of Plasticity, vol.21, pp.1890-1918, 2005.

Y. J. Wei and L. Anand, Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals, Journal of the Mechanics and Physics of Solids, vol.52, pp.2587-2616, 2004.

F. Grondin and M. Matallah, How to consider the Interfacial Transition Zones in the finite element modelling of concrete?, Cement and Concrete Research, vol.58, pp.67-75, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01006934

A. Caballero, C. M. López, and I. Carol, 3D meso-structural analysis of concrete specimens under uniaxial tension, Computer Methods in Applied Mechanics and Engineering, vol.195, pp.7182-7195, 2006.

S. Kim and R. K. , Abu Al-Rub, Meso-scale computational modeling of the plastic-damage response of cementitious composites, vol.41, pp.339-358, 2011.

H. Man and J. G. Van-mier, Influence of particle density on 3D size effects in the fracture of (numerical) concrete, Mech. Mater, vol.40, pp.470-486, 2008.

D. Asahina, E. N. Landis, and J. E. Bolander, Modeling of phase interfaces during pre-critical crack growth in concrete, Cement and Concrete Composites, vol.33, pp.966-977, 2011.

B. ?avija, J. Pacheco, and E. Schlangen, Lattice modeling of chloride diffusion in sound and cracked concrete, Cement and Concrete Composites, vol.42, pp.30-40, 2013.

J. Yvonnet, H. L. Quang, and Q. C. He, An XFEM/level set approach to modelling surface/interface effects and to computing the size-dependent effective properties of nanocomposites, Computational Mechanics, vol.42, pp.119-131, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00692238

Q. Zhu, S. Gu, J. Yvonnet, J. Shao, and Q. He, Three-dimensional numerical modelling by XFEM of spring-layer imperfect curved interfaces with applications to linearly elastic composite materials, International Journal for Numerical Methods in Engineering, vol.88, pp.307-328, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00659383

G. Alfano and E. Sacco, Combining interface damage and friction in a cohesive-zone model, Int. J. Numer. Meth. Engng, vol.68, pp.542-582, 2006.

X. F. Wang, Z. J. Yang, J. R. Yates, A. P. Jivkov, and C. Zhang, Monte Carlo simulations of mesoscale fracture modelling of concrete with random aggregates and pores, Construction and Building Materials, vol.75, pp.35-45, 2015.

T. Wu and P. Wriggers, Multiscale diffusion-thermal-mechanical cohesive zone model for concrete, Comput Mech, pp.1-18, 2015.

B. Bary, M. Ben-haha, E. Adam, and P. , Numerical and analytical effective elastic properties of degraded cement pastes, Cement and Concrete Research, vol.39, pp.902-912, 2009.

T. De-larrard, B. Bary, E. Adam, and F. Kloss, Influence of aggregate shapes on drying and carbonation phenomena in 3D concrete numerical samples, Computational Materials Science, vol.72, pp.1-14, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01738414

T. T. Nguyen, B. Bary, and T. De-larrard, Coupled carbonation-rust formation-damage modeling and simulation of steel corrosion in 3D mesoscale reinforced concrete, Cement and Concrete Research, vol.74, pp.95-107, 2015.

B. Bary, C. Bourcier, and T. Helfer, Numerical analysis of concrete creep on mesoscopic 3D specimens, Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, 2015.

C. F. Dunant, B. Bary, A. B. Giorla, C. Péniguel, J. Sanahuja et al., A critical comparison of several numerical methods for computing effective properties of highly heterogeneous materials, Advances in Engineering Software, vol.58, pp.1-12, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00804043

J. Mandel, Cours de mécanique des milieux continus, 1966.

S. Beurthey and A. Zaoui, Structural morphology and relaxation spectra of viscoelastic heterogeneous materials, European Journal of Mechanics -A/Solids, vol.19, pp.1-16, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00111287

N. Laws and R. Mclaughlin, Self-consistent estimates for the viscoelastic creep compliances of composite materials, Proc. R. Soc. Lond. A, vol.359, pp.251-273, 1978.

L. C. Brinson and W. S. Lin, Comparison of micromechanics methods for effective properties of multiphase viscoelastic composites, Composite Structures, vol.41, pp.353-367, 1998.

C. Donolato, Analytical and numerical inversion of the Laplace-Carson transform by a differential method, Computer Physics Communications, vol.145, pp.298-309, 2002.

M. Lévesque, M. D. Gilchrist, N. Bouleau, K. Derrien, and D. Baptiste, Numerical inversion of the Laplace-Carson transform applied to homogenization of randomly reinforced linear viscoelastic media, Comput Mech, vol.40, pp.771-789, 2006.

R. A. Schapery, Approximate methods of transform inversion for viscoelastic stress analysis, Proc. 4th US Nat'l Cong, pp.1075-1085, 1962.

A. Rekik and R. Brenner, Optimization of the collocation inversion method for the linear viscoelastic homogenization, Mechanics Research Communications, vol.38, pp.305-308, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00653303

M. Thai, B. Bary, and Q. He, A homogenization-enriched viscodamage model for cement-based material creep, Engineering Fracture Mechanics, vol.126, pp.54-72, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01167843

H. L. Duan, X. Yi, Z. P. Huang, and J. Wang, A unified scheme for prediction of effective moduli of multiphase composites with interface effects: Part II-Application and scaling laws, Mechanics of Materials, vol.39, pp.94-103, 2007.

Z. Hashin, Thin interphase/imperfect interface in elasticity with application to coated fiber composites, Journal of the Mechanics and Physics of Solids, vol.50, pp.2509-2537, 2002.

S. Gu, J. Liu, and Q. He, Size-dependent effective elastic moduli of particulate composites with interfacial displacement and traction discontinuities, International Journal of Solids and Structures, vol.51, pp.2283-2296, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01167846

T. Mori and K. Tanaka, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metallurgica, vol.21, pp.571-574, 1973.

R. Christensen and K. Lo, Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, vol.27, pp.315-330, 1979.

Z. Hashin, Thermoelastic properties of fiber composites with imperfect interface, Mechanics of Materials, vol.8, p.90051, 1990.

C. Bourcier, W. Dridi, L. Chomat, E. Laucoin, B. Bary et al., Combs: open source python library for RVE generation. Application to microscale diffusion simulations in cementitious materials, 2013.

S. Thomas, Y. Lu, and E. J. Garboczi, Improved model for three-dimensional virtual concrete: anm model, Journal of Computing in Civil Engineering, vol.30, p.4015027, 2016.

W. Ladaoui, Etude expérimentale du comportement Thermo-Hydro-Mécanique à long terme des BHP destinés aux ouvrages de stockage des déchets radioactifs, 2010.

C. M. Neubauer, H. M. Jennings, and E. J. Garboczi, A three-phase model of the elastic and shrinkage properties of mortar, Advanced Cement Based Materials, vol.4, pp.6-20, 1996.

T. Helfer, B. Michel, J. Proix, M. Salvo, J. Sercombe et al., Introducing the open-source mfront code generator: Application to mechanical behaviours and material knowledge management within the PLEIADES fuel element modelling platform, Computers & Mathematics with Applications, vol.70, pp.994-1023, 2015.

T. Kanit, S. Forest, I. Galliet, V. Mounoury, and D. Jeulin, Determination of the size of the representative volume element for random composites: statistical and numerical approach, Int. J. Solids Struct, vol.40, pp.3647-3679, 2003.

M. Salmi, F. Auslender, M. Bornert, and M. Fogli, Apparent and effective mechanical properties of linear matrix-inclusion random composites: Improved bounds for the effective behavior, International Journal of Solids and Structures, vol.49, pp.1195-1211, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01157362

K. Sab, On the homogenization and the simulation of random materials, European Journal of Mechanics. A. Solids, vol.11, pp.585-607, 1992.

S. Pecullan, L. V. Gibiansky, and S. Torquato, Scale effects on the elastic behavior of periodic and hierarchical two-dimensional composites, Journal of the Mechanics and Physics of Solids, vol.47, pp.1509-1542, 1999.

Z. Hashin and P. Monteiro, An inverse method to determine the elastic properties of the interphase between the aggregate and the cement paste, Cement and Concrete Research, vol.32, p.1860, 2002.

Y. Huang, K. X. Hu, X. Wei, and A. Chandra, A generalized self-consistent mechanics method for composite materials with multiphase inclusions, Journal of the Mechanics and Physics of Solids, vol.42, pp.491-504, 1994.

S. Arthanari and C. W. Yu, Creep of concrete under uniaxial and biaxial stresses at elevated temperatures, Mag. Concr. Res, vol.19, pp.149-156, 1967.

Z. P. Bazant, G. Cusatis, and L. Cedolin, Temperature effect on concrete creep modeled by microprestresssolidification theory, J. Eng. Mech, vol.130, pp.691-699, 2004.

W. Ladaoui, T. Vidal, A. Sellier, and X. Bourbon, Effect of a temperature change from 20 to 50°C on the basic creep of HPC and HPFRC, Materials and Structures, vol.44, pp.1629-1639, 2011.

C. R. Cruz and M. Gillen, Thermal expansion of Portland cement paste, mortar and concrete at high temperatures, Fire Mater, vol.4, pp.66-70, 1980.

M. Wyrzykowski and P. Lura, Controlling the coefficient of thermal expansion of cementitious materials -A new application for superabsorbent polymers, Cement and Concrete Composites, vol.35, pp.49-58, 2013.

V. M. Levin, On the coefficients of thermal expansion of heterogeneous materials, Mechanics of Solids, vol.2, pp.58-61, 1967.

H. L. Duan and B. L. Karihaloo, Thermo-elastic properties of heterogeneous materials with imperfect interfaces: Generalized Levin's formula and Hill's connections, Journal of the Mechanics and Physics of Solids, vol.55, pp.1036-1052, 2007.

B. Bary and S. Bejaoui, Assessment of diffusive and mechanical properties of hardened cement pastes using a multi-coated sphere assemblage model, Cement and Concrete Research, vol.36, pp.245-258, 2006.

E. Hervé, Thermal and thermoelastic behaviour of multiply coated inclusion-reinforced composites, International Journal of Solids and Structures, vol.39, pp.1041-1058, 1917.