H. H. Santana, G. Maier, U. W. Scherer, and J. Rodenas, Analysis of Mechanical strength in ceramic pellets of nuclear fuel, Radiation Effects and Defects in Solids, vol.164, pp.313-318, 2009.

K. Sudo, T. Takano, K. Takeuchi, Y. Kihara, and M. Kato, Development of Pressing Machine with a Die Wall Lubrication System for the Simplified MOX Pellet Fabrication Method in the FaCT Project, Proceedings of Global, 2011.

U. Klemm and D. Sobek, Influence of admixing of lubricants on compressibility and compactibility of uranium dioxide powders, Powder Technology, vol.57, pp.135-142, 1989.

A. Simchi, Effects of lubrication procedure on the consolidation, sintering and microstructural features of powder compacts, Materials and Design, vol.24, pp.585-594, 2003.

P. Lemieux, S. Pelletier, P. E. Mongeon, Y. Thomas, L. P. Lefebvre et al., A new approach to die wall lubrication for P/M application, International Conference of Powder Metallurgy & Particulate Materials (PM2TEC'2001), 2001.

W. G. Ball, P. F. Hibner, F. W. Hinger, J. E. Peterson, and R. R. Phillips, New die wall lubrication system, The International Journal of Powder Metallurgy, vol.33, pp.23-30, 1997.

Y. Li, H. Liu, and A. Rockabrand, Wall friction and lubrication during compaction of coal logs, Powder Technology, vol.87, pp.259-267, 1996.

T. Yamamura, T. Ohta, T. Taira, Y. Ogawa, Y. Sakai et al., Effects of automated external lubrication on tablet properties and the stability of eprazinone hydrochloride, International Journal of Pharmaceutics, vol.370, pp.1-7, 2009.

J. Wang, H. Wen, and D. Desai, Lubrication in tablet formulations, European Journal of Pharmaceutics and Biopharmaceutics, vol.75, pp.1-15, 2010.

J. Mosig and P. Kleinebudde, Evaluation of lubrication methods: How to generate a comparable lubrication for dry granules and powder material for tableting process, Powder Technology, vol.266, pp.156-166, 2014.

A. Rawlings, S. Luk, and F. Hanejko, Engineered Approach to High Density Forming using Internal and External Lubricants

S. S. Nor, M. M. Rahman, F. Tarlochan, B. Shahida, and A. K. Ariffin, The effect of lubrication in reducing net friction in warm powder compaction process, Journal of Materials Processing Technology, vol.207, pp.118-124, 2008.

X. Yang, S. J. Guo, B. F. Chen, F. Meng, and Y. D. Lian, Electrostatic performance of various lubricant powders in P/M electrostatic die wall lubrication, Powder Technology, vol.164, pp.75-81, 2006.

C. Machio, R. Machaka, and H. K. Chikwanda, Consolidation of titanium hybride powders during the production of titanium PM parts : The effect of die wall lubricants, Materials and Design, vol.90, pp.757-766, 2016.

J. Wang, H. Wen, and D. Desai, Lubrication in tablet formulations, European Journal of Pharmaceutics and Biopharmaceutics, vol.75, pp.1-15, 2010.

P. Balakrishna, B. N. Murty, R. B. Yadav, M. Anuradha, P. S. Narayanan et al., Admixed binders and lubricants in ceramic powder pressing-A study of zinc behenate additives, Indian Journal of Engineering & Materials Sciences, vol.5, pp.136-139, 1998.

Y. A. Yusof, S. K. Ng, N. L. Chin, and R. A. Talib, Compaction pressure, wall friction and surface roughness upon compaction strength of Andrographis paniculata tablets, Tribology International, vol.43, pp.1168-1174, 2010.

B. J. Briscoe and S. L. Rough, The effects of wall friction in powder compaction, A: Physicochemical and Engineering Aspects, vol.137, pp.103-116, 1998.

Y. Tien, P. Wu, W. Huang, M. Kuo, and C. Chu, Wall friction measurement and compaction characteristics of bentonite powders, Powder Technology, vol.173, pp.140-151, 2007.

E. N. Hiestand, J. E. Wells, C. B. Peot, and J. F. Ochs, Physical Processes of Tableting, Journal of Pharmaceutical Sciences, vol.66, issue.4, pp.510-519, 1977.

D. K. Shetty, A. R. Rosenfield, and W. H. Duckworth, Mixed-mode fracture of ceramics in diametral compression, J. Amer. Ceram. Soc, vol.69, issue.6, pp.437-443, 1986.

F. Gálvez, J. Rodríguez, and V. Sánchez, Tensile strength measurements of ceramic materials at high rates of strain, J. de Physique IV, pp.151-156, 1997.

N. James, W. Thomas, and . Kennedy, Practical method of conducting the indirect tensile test, 1972.

J. Mccool, Analysis of sets of two-parameter Weibull data arising in rolling contact endurance testing, rolling contact fatigue testing of bearing steels, ASTM STP, vol.771, pp.293-319, 1982.

B. J. Briscoe, P. D. Evans, and . Wall, Powder Technology, vol.65, pp.7-20, 1991.

M. Nurula and S. Syahrullailb, Lubricant viscosity: Evaluation between existing and alternative lubricant in metal forming process, Procedia Manufacturing, vol.2, pp.470-475, 2015.

J. W. Robinson, Y. Zhou, J. Qu, J. T. Bays, and L. Cosimbescu, Highly branched polyethylenes as lubricant viscosity and friction modifiers, Reactive and Functional Polymers, vol.109, pp.52-55, 2016.