P. Duxson, A. Fernández-jiménez, J. Provis, G. Lukey, A. Palomo et al., Geopolymer technology: the current state of the art, J. Mater. Sci, vol.42, pp.2917-2933, 2007.

H. Xu and J. S. Van-deventer, The geopolymerisation of alumino-silicate minerals, Int. J. Miner. Process, vol.59, pp.247-266, 2000.

D. Dimas, I. Giannopoulou, and D. Panias, Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology, J. Mater. Sci, vol.44, pp.3719-3730, 2009.

J. L. Provis and J. S. Van-deventer, Geopolymers: structures, processing, properties and industrial applications, 2009.

A. Palomo and J. I. Lopez-de-la-fuente, Alkali-activated cementitous materials: Alternative matrices for the immobilisation of hazardous wastes: Part I. Stabilisation of boron, Cem. Concr. Res, vol.33, pp.281-288, 2003.

A. Palomo and M. Palacios, Alkali-activated cementitious materials: Alternative matrices for the immobilisation of hazardous wastes: Part II. Stabilisation of chromium and lead, Cem. Concr. Res, vol.33, pp.289-295, 2003.

A. Rooses, P. Steins, A. Dannoux-papin, D. Lambertin, A. Poulesquen et al., Encapsulation of Mg-Zr alloy in metakaolin-based geopolymer, Appl. Clay Sci, vol.73, pp.86-92, 2013.

D. M. Roy, Alkali-activated cements Opportunities and challenges, Cem. Concr. Res, vol.29, pp.249-254, 1999.

V. Cantarel, F. Nouaille, A. Rooses, D. Lambertin, A. Poulesquen et al., Solidification/stabilisation of liquid oil waste in metakaolin-based geopolymer, J. Nucl. Mater, vol.464, pp.16-19, 2015.

P. Duxson, J. L. Provis, G. C. Lukey, S. W. Mallicoat, W. M. Kriven et al., Understanding the relationship between geopolymer composition, microstructure and mechanical properties, Colloids Surf., A, vol.269, pp.47-58, 2005.

B. E. Glad and W. M. Kriven, Optimization of Gas Adsorption Porosimetry for Geopolymer Analysis, J. Am. Ceram. Soc, vol.96, pp.3643-3649, 2013.

C. F. Maitland, C. E. Buckley, B. H. O'connor, P. D. Butler, and R. D. Hart, Characterization of the pore structure of metakaolin-derived geopolymers by neutron scattering and electron microscopy, J. Appl. Crystallogr, vol.44, pp.697-707

J. L. Bell and W. M. Kriven, Nanoporosity in Aluminosilicate, Geopolymeric Cements. Microscopy and Microanalysis, vol.10, pp.590-591, 2004.

A. Fernandez-jimenez, D. E. Macphee, E. E. Lachowski, and A. Palomo, Immobilization of cesium in alkaline activated fly ash matrix, J. Nucl. Mater, vol.346, pp.185-193, 2005.

F. Skvara, L. Kopecky, J. Nemecek, and Z. Bittnar, Microstructure of geopolymer materials based on fly ash, Ceramics-Silikaty, vol.50, pp.208-215, 2006.

P. Steins, A. Poulesquen, F. Frizon, O. Diat, J. Jestin et al., Effect of aging and alkali activator on the porous structure of a geopolymer, J. Appl. Crystallogr, vol.47, pp.316-324, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01044592

R. R. Lloyd, J. L. Provis, K. J. Smeaton, and J. S. Van-deventer, Spatial distribution of pores in fly ash-based inorganic polymer gels visualised by Wood's metal intrusion, Microporous and Mesoporous Materials, vol.126, pp.32-39, 2009.

M. Steveson and K. Sagoe-crentsil, Relationships between composition, structure and strength of inorganic polymers, J. Mater. Sci, vol.40, pp.2023-2036, 2005.

C. Boher, F. Frizon, S. Lorente, and F. Bart, Influence of the pore network on hydrogen diffusion through blended cement pastes, Cem. Concr. Compos, vol.37, pp.30-36, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01850844

C. Boher, I. Martin, S. Lorente, and F. Frizon, Experimental investigation of gas diffusion through monomodal materials. Application to geopolymers and Vycor® glasses, Microporous and Mesoporous Materials, vol.184, pp.28-36, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01850748

P. Rovnaník, Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer, Construction and Building Materials, vol.24, pp.1176-1183, 2010.

P. Steins, A. Poulesquen, O. Diat, and F. Frizon, Structural Evolution during Geopolymerization from an Early Age to Consolidated Material, Langmuir, vol.28, pp.8502-8510, 2012.

J. Melar, G. Renaudin, F. Leroux, A. Hardy-dessources, J. Nedelec et al., The Porous Network and its Interface inside Geopolymers as a Function of Alkali Cation and Aging, J. Phys. Chem. C, vol.119, pp.17619-17632, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01211380

J. D. Ramsay, Surface and pore structure characterisation by neutron scattering techniques, Adv. Colloid Interface Sci, pp.13-37, 1998.

B. Gouze, J. Cambedouzou, S. Parrès-maynadié, and D. Rébiscoul, How hexagonal mesoporous silica evolves in water on short and long term: Role of pore size and silica wall porosity, Microporous and Mesoporous Materials, vol.183, pp.168-176, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01998160

M. Cyr, P. Rivard, F. Labrecque, and A. Daidie, High Pressure Device for Fluid Extraction from Porous Materials: Application to Cement Based Materials, J. Am. Ceram. Soc, vol.91, pp.2653-2658, 2008.
URL : https://hal.archives-ouvertes.fr/hal-02120204

C. Gallé, Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying, Cem. Concr. Res, vol.31, pp.1467-1477, 2001.

A. Brûlet, D. Lairez, A. Lapp, and J. Cotton, Improvement of data treatment in smallangle neutron scattering, J. Appl. Crystallogr, vol.40, pp.165-177, 2007.

G. Porod and -. Kolloid, , vol.124, p.108, 1952.

J. Rouquerol, D. Avnir, C. W. Fairbridge, D. H. Everet, N. Pernicone et al., Recommendations for the characterization of porous solids, Pure Appl. Chem, vol.66, pp.1739-1758, 1994.

G. Q. Lu and X. S. Zhao, Nanoporous materials: science and engineering, World Scientific, vol.4, 2004.

H. Naono, M. Hakuman, T. Tanaka, N. Tamura, and K. Nakai, Porous Texture and Surface Character of Dehydroxylated and Rehydroxylated MCM-41 Mesoporous Silicas-Analysis of Adsorption Isotherms of Nitrogen Gas and Water Vapor, J. Colloid Interface Sci, vol.225, pp.411-420, 2000.

A. V. Neimark, P. I. Ravikovitch, M. Grün, F. Schüth, and K. K. Unger, Pore Size Analysis of MCM-41 Type Adsorbents by Means of Nitrogen and Argon Adsorption, J. Colloid Interface Sci, vol.207, pp.159-169, 1998.

M. Kruk, M. Jaroniec, J. M. Kim, and R. Ryoo, Characterization of Highly Ordered MCM-41 Silicas Using X-ray Diffraction and Nitrogen Adsorption, Langmuir, vol.15, pp.5279-5284, 1999.

P. I. Ravikovitch and A. V. Neimark, Characterization of Micro-and Mesoporosity in SBA-15 Materials from Adsorption Data by the NLDFT Method, J. Phys. Chem. B, vol.105, pp.6817-6823, 2001.

C. A. León-y-león, New perspectives in mercury porosimetry, Adv. Colloid Interface Sci, pp.341-372, 1998.

J. L. Provis, R. J. Myers, C. E. White, V. Rose, and J. S. Van-deventer, X-ray microtomography shows pore structure and tortuosity in alkali-activated binders, Cem. Concr. Res, vol.42, pp.855-864, 2012.