Y. Pontillon, E. Geiger, C. L. Gall, S. Bernard, A. Gallais-during et al., Fission products and nuclear fuel behavior under severe accident conditions -Part 1: Main lessons learnt from the first VERDON test, Journal of Nuclear Materials, Submitting

J. Noirot, L. Desgranges, and J. Lamontagne, Detailed characterisations of high burn-up structures in oxide fuels, Journal of Nuclear Materials, vol.372, issue.2-3, pp.318-339, 2008.

H. Matzke and J. Spino, Formation of the rim structure in high burnup fuel, Journal of Nuclear Materials, vol.248, pp.170-179, 1997.

J. Spino, K. Vennix, and M. Coquerelle, Detailed characterisation of the rim microstructure in PWR fuels in the burn-up range 40-67 GWd/tM, Journal of Nuclear Materials, vol.231, issue.3, pp.179-190, 1996.

H. Kleykamp, The chemical state of the fission products in oxide fuels, Journal of Nuclear Materials, vol.131, issue.2-3, pp.221-246, 1985.

T. Blay, I. Roure, and J. Lamontagne, FX0GAC/E04/4034 -Examen au MEB et à la microsonde d'un combustible REP UO2 ALIX irradié 6 cycles dans GRAVELINES 5, CEA Cadarache, 2003.

G. Ducros, S. Bernard, M. P. Ferroud-plattet, and O. Ichim, Use of Gamma spectrometry for measuring fission product releases during a simulated PWR severe accident: Application to the VERDON experimental program, pp.1-7, 2009.

A. Gallais-during, J. Bonnin, P. Malgouyres, S. Bernard, Y. Pontillon et al., VERDON Laboratory : Performances of the Experimental LWR Severe Accident Device and Fisrt Results of Fission Products Release on High Burn-up UO2 fuel, presented at the 21st International Conference Nuclear Energy for New Europe, Ljubjana, 2012.

A. Gallais-during, J. Bonnin, P. Malgouyres, S. Morin, S. Bernard et al., Performance and first results of fission product release and transportprovided by the VERDON facility, Nuclear Engineering and Design, vol.277, pp.117-123, 2014.

Y. Pontillon, J. Bonnin, E. Addes, J. Cochaud, J. Piquemal et al., Fission gas release under normal and off-normal conditions: New analytical device implemented at the CEA Cadarache," presented at the European Working Group "Hot Laboratories and Remote handling, Plenary Meeting, 2005.

A. Gallais-during, J. Bonnin, P. Malgouyres, S. Morin, S. Bernard et al., Performance and first results of fission product release and transport provided by the VERDON facility, Nuclear Engineering and Design, vol.277, pp.117-123, 2014.

Y. Pontillon, G. Ducros, and P. P. Malgouyres, Behaviour of fission products under severe PWR accident conditions VERCORS experimental programme-Part 1: General description of the programme, Nuclear Engineering and Design, vol.240, issue.7, pp.1843-1852, 2010.

C. L. Gall, E. Geiger, Y. Pontillon, A. Gallais-during, J. Lamontagne et al., Fission products and nuclear fuel behavior under severe accident conditions -Part 3: Fission products speciation in the VERDON-1 sample, Journal of Nuclear Materials, Submitting
URL : https://hal.archives-ouvertes.fr/cea-02380864

Y. Pontillon and G. Ducros, Behaviour of fission products under severe PWR accident conditions: The VERCORS experimental programme-Part 2: Release and transport of fission gases and volatile fission products, Nuclear Engineering and Design, vol.240, issue.7, pp.1853-1866, 2010.

Y. Pontillon and G. Ducros, Behaviour of fission products under severe PWR accident conditions. The VERCORS experimental programme-Part 3: Release of low-volatile fission products and actinides, Nuclear Engineering and Design, vol.240, issue.7, pp.1867-1881, 2010.

V. J. Wheeler and I. G. Jones, Thermodynamic and composition changes in UO2±x (x< 0.005) at 1950 K, Journal of Nuclear Materials, vol.42, issue.2, pp.117-121, 1972.

P. Piluso, G. Trillon, and C. Journeau, The UO2-ZrO2 system at high temperature (T > 2000 K): importance of the meta-stable phases under severe accident conditions, Journal of Nuclear Materials, vol.344, issue.1-3, pp.259-264, 2005.

A. Quaini, C. Guéneau, S. Gossé, B. Sundman, D. Manara et al., High temperature investigation of the solid/liquid transition in the PuO2-UO2-ZrO2 system, Journal of Nuclear Materials, vol.467, issue.2, pp.660-676, 2015.