T. Muroga, M. Gasparotto, and S. J. Zinkle, Overwiew of materials research for fusion reactors, Fusion Engineering and Design, pp.61-62, 2002.

A. Hasegawa, A. Kohyama, R. H. Jones, L. L. Snead, B. Riccardi et al., Critical issues and current status of SiC / SiC composites for fusion, Journal of Nuclear Materials, pp.283-287, 2000.

H. M. Yun, J. C. Goldsby, and J. A. Dicarlo, Tensile creep and stress-rupture behavior of polymer derived SiC fibers, Advances in Ceramic-Matrix Composites II, pp.17-28, 1995.

H. M. Yun and J. A. Dicarlo, Comparison of the tensile, creep, and rupture strength properties of stoichiometric SiC fibers, 1999.

N. Hochet, M. H. Berger, and A. R. Bunsell, Microstructural evolution of the latest generation of small diameter siC based fibres tested at high temperature, J. Microscopy, vol.185, pp.243-258, 1997.

R. Bodet, X. Bourrat, J. Lamon, and R. Naslain, Tensile creep behavior of a silicon carbidebased fiber with a low oxygen content, J. Mat. Sci, vol.30, pp.661-677, 1995.

G. Chollon, R. Pailler, R. Naslain, and P. Olry, Correlation between microstructure and mechanical behaviour at high temperatures of a SIC fibre with a low oxygen content (Hi-Nicalon), Journal of Materials Science, vol.32, pp.1133-1147, 1997.

J. A. Dicarlo and H. M. Yun, Microstructural factors affecting creep-rupture failure of ceramic fibers and composites, Ceramic Material systems with Composite structures, pp.119-134, 1998.

F. A. Kandil and B. F. Dyson, Tensile creep of ceramics: the development of a testing facility, pp. 151 in mechanical testing of engineering ceramics at high temperatures

R. D. Dyson, &. Lohr, and . Morell, , 1989.

I. J. Davies, Effect of variable radius on the initial creep rate of ceramic fibres, J. Mat. Sci, issue.23, pp.6187-6193, 2005.

G. A. Newsome, The effect of neutron irradiation on silicon carbide fibers, Ceramic Engineering & Science Proceedings, vol.18, issue.3, 1997.

M. H. Berger and A. R. Bunsell, Thin Foil preparation of small diameter ceramic or glass fibres for observation by transmission electron microscopy, Journal of Materials Science Letters, vol.12, pp.825-828, 1993.

C. Sauder, J. Lamon, and R. Pailler, Thermomechanical properties of carbon fibers at high temperatures (up to 2000°C), Composites Science and Technology, vol.62, issue.4, pp.499-504, 2002.

T. Shimoo, H. Takeuchi, and K. Okamura, Thermal stability of Polycarbosilane-derived silicon carbide fibers under reduced pressures, J. Am. Ceram. Soc, pp.84-87, 2001.

, Advanced technical ceramics -Ceramic Composites. Methods of tests for reinforcement -Part 6 : Determination of tensile properties of filament at high temperature -European standard CENTC, vol.184, pp.1007-1013, 2001.

S. M. Dong, G. Chollon, C. Labrugere, M. Lahaye, A. Guette et al., Characterization of nearly stoichiometric SiC Ceramic fibres, Journal of Materials Science, vol.36, pp.2371-2381, 2001.

M. H. Berger, N. Hochet, and A. R. Bunsell, Microstructure and thermo-mechanical stability of a low-oxygen Nicalon fibre, Journal of Microscopy, issue.3, pp.230-241, 1994.

N. Hochet, M. H. Berger, and A. R. Bunsell, Microstructural evolution of the latest generation of small-diameter SiC-based fibres tested at high temperatures, Journal of Microscopy, issue.2, pp.243-258, 1997.

T. Ishikawa, T. Sato, Y. Tanaka, and M. Suzuki, A thermally conductive SiC-Polycristalline fiber and its fiber-bounded ceramic, Ceram Eng & Sci Proceedings, 2001.

B. T. Kelly, Physics of graphite, 1981.

C. Sauder, J. Lamon, and R. Pailler, The tensile behavior of carbon fibers at high temperatures up to 2400°C, Carbon, vol.42, pp.715-725, 2004.

T. L. Francis and R. L. Coble, Creep of Polycrystalline silicon carbide, Journal of the American Ceramic Society, issue.2, pp.115-116, 1968.

V. Krishnamashari and M. R. Notis, Interpretation of high-temperature creep of SiC by deformation mapping techniques, Materials Science and Engineering, vol.27, pp.83-88, 1977.

N. Morscher, H. M. Yun, and J. C. Goldsby, Bend stress relaxation and tensile primary creep of a polycrystalline ?-SiC fiber, pp.467-478, 1995.

G. Grathwohl, R. Th, and F. Thummler, Creep of Hot-pressed and sintered SiC with different sintering additives, Science of ceramics, vol.11, pp.425-431, 1981.

J. D. Hong, M. H. Hon, and R. F. Davis, Ceramurgia International, 5, pp.155-160, 1979.

P. Eveno, J. Li, A. M. Huntz-and, and J. Chaumont, Diffusion of 13 C and 29 Si implanted ions in SiC, Materials Science and Engineering, 1992.

R. N. Ghoshtagore and R. L. Coble, Self-Diffusion in silicon carbide, Physical Review, p.143

M. H. Hon and R. F. Davis, Self-diffusion of 14 C in Polycristalline ?-SiC, Journal Of Materials Science, vol.14, pp.2411-2421, 1979.

M. H. Hon, D. , and E. Newbury, Self-diffusion of 30 Si in Polycristalline ?-SiC, Journal Of Materials Science, vol.15, pp.2073-2080, 1980.

R. Kossowsky, Cyclic fatigue of Hot-pressed Si 3 N 4, J. Amer. Ceram. Soc, vol.56, p.531, 1973.

P. L. Farnsworth and R. L. Coble, Deformation behavior of dense polycrystalline SiC, Journal of the American Ceramic Society, pp.49-54, 1966.

R. Bodet, J. Lamon, N. Jia, and R. E. Tressler, Microstructure stability and creep behavior of Si-C-O (nicalon) fibers in carbon monoxide and argon environments, J. Am, Ceram. Soc, issue.10, pp.2673-2683, 1996.

H. M. Yun and J. A. Dicarlo, Comparison of the tensile, creep, and rupture strength properties of stoichiometric SiC fibers, NASA/TM-1999-209284 report, 1999.

J. A. Dicarlo and H. M. Yun, Microstructural factors affecting creep-rupture failure of ceramic fibers and composites, Ceramic Material systems with Composite structures, pp.119-134, 1998.

A. Piant, A. Bunsell, and D. Ormston, Comportement mécanique à haute temperature des fibres SiC de dernière generation, Groupe Français de la Céramique, pp.81-84, 2004.

T. G. Langdon, Grain Boundary Deformation Process, pp.101-125, 1974.

Y. O. Tajima and W. D. Kingery, Grain boundary segregation in aluminium-doped silicon carbide, J. Mater. Sci, vol.17, pp.2289-2297, 1982.

J. L. Chermant and F. Osterstock, Creep Behaviour of SiC-Al Materials, Materials Science and Engineering, vol.71, pp.147-157, 1985.

K. Schnurer, G. Grathwohl, and F. Thummler, Sci. Ceram, vol.10, pp.645-650, 1980.

P. Rocabois, Stabilité thermochimique des composites ceramiques base SiC approche thermodynamique et expérimentale du système Si-O-C-N, 1993.

P. Grieveson and C. B. Alcock, The Thermodynamics of Metal Silicides and Silicon Carbide, special Ceramic, p.183, 1960.

G. V. Samsonov, Plenum press handbooks of high-temperature materials : properties index, 1964.

D. L. Hildenbrand and W. F. Hall, The decomposition Pressure of boron Carbide and the heat of sublimation of Boron, The Journal of Physical Chemistry, issue.5, pp.989-993, 1964.

J. E. Sheehan, Recent progress into carbon-carbon composites, Proc. 4 th Annual conference, pp.57-98, 1987.

C. B. Alcock, Zirconium : Physico-Chemical properties of its Compounds and Alloys -I

, Thermodynamics properties, vol.6, pp.7-63, 1976.

D. R. Physics and . Lide, , 1990.

S. C. Singhal, Thermodynamic analysis of the high-temperature stability of silicon nitride and silicon carbide, 1970.

G. Chollon, Fibres céramiques à base de carbure de silicium et à faible taux d'oxygène, 1995.

J. J. Sha, T. Nozawa, J. S. Park, Y. Katoh, and A. Kohyama, Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers, Journal of Nuclear Materials, pp.329-333, 2004.

, SA3(2) (b) Hi-Nicalon S