E. Remy, Journal of the European Ceramic Society, 2012.

B. Boullis and D. Warin, Recent progress in advanced actinide recycling processes, OECD Nuclear Energy Agency 11th information exchange meeting on actinide and fission product partitioning and transmutation, 2010.

R. Konings and D. Haas, Fuels and targets for transmutation, C R Phys, vol.3, pp.1013-1035, 2002.

E. Remy, Journal of the European Ceramic Society, 2012.

J. P. Grouiller, S. Pillon, S. Jean, C. D. Varaine, F. Leyval et al., Minor actinides transmutation scenario studies with PWRs, FRs and moderated targets, J Nucl Mater, vol.320, pp.163-172, 2003.
URL : https://hal.archives-ouvertes.fr/cea-02360116

D. Prieur, A. Jankowiak, C. Leorier, N. Herlet, L. Donnet et al., Fabrication and characterization of minor actinides bearing fuels obtained by conventional powder metallurgy process, Powder Technol, vol.208, pp.553-560, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00632154

D. Prieur, A. Jankowiak, T. Delahaye, N. Herlet, P. Dehaudt et al., Fabrication and characterisation of U 0.85 Am 0.15 O 2?x discs for MARIOS irradiation program, J Nucl Mater, vol.414, pp.503-510, 2011.

M. Vespa, M. Rini, J. Spino, T. Vitova, and J. Somers, Fabrication and characterization of (U,Am)O 2?x transmutation targets, J Nucl Mater, vol.421, pp.80-88, 2012.

S. M. Tiegs, P. A. Haas, and R. D. Spence, The sphere-cal process: fabrication of fuel pellets from gel microspheres. Oak Ridge National Laboratory, p.6906, 1979.

R. B. Matthews and P. E. Hart, Hybrid pellets: an improved concept for fabrication of nuclear fuel. Pacific Northwest Laboratory, p.3134, 1979.

S. M. Tiegs and P. A. Haas, Improved fuel pellet fabrication using gel microspheres, Trans Am Nucl Soc, vol.33, pp.273-278, 1979.

C. Ganguly, H. Langen, E. Zimmer, and E. R. Merz, Sol-gel microsphere pelletization process for fabrication of high-density ThO 2 -2-percent UO 2 fuel for advanced pressurized heavy-water reactors, Nucl Technol, vol.73, pp.84-95, 1986.

C. Ganguly, U. Linke, and E. Kaiser, Microstructure of gel-pelletized (Th,U)O 2, Prakt Metallogr, vol.23, pp.163-74, 1986.

S. Yamagishi and Y. Takahashi, Preparation of high-density (Th,U)O 2 pellets by sol-gel microsphere pelletization and 1300 ? C air sintering, J Nucl Mater, vol.217, pp.127-164, 1994.

C. Ganguly and U. Basak, Fabrication of high density UO 2 fuel pellets involving sol-gel microsphere pelletisation and low temperature sintering, J Nucl Mater, vol.178, pp.179-83, 1991.

S. Suryanarayana, N. Kumar, Y. R. Bamankar, V. N. Vaidya, and D. D. Sood, Fabrication of UO 2 pellets by gel pelletization technique without addition of carbon as pore former, J Nucl Mater, vol.230, pp.140-147, 1996.

E. Zimmer, C. Ganguly, J. Borchardt, and H. Langen, SGMP -an advanced method for fabrication of UO 2 and MOX fuel pellets, J Nucl Mater, vol.152, pp.169-77, 1988.

C. Ganguly, U. Linke, and E. Kaiser, Characterization of (U,Ce)O 2 pellets prepared by the sol-gel microsphere pelletization process, Metallography, vol.20, pp.1-14, 1987.

N. Kumar, R. V. Pai, J. K. Joshi, S. K. Mukerjee, V. N. Vaidya et al., Preparation of (U,PU)O 2 pellets through sol-gel microsphere pelletization technique, J Nucl Mater, vol.359, pp.69-79, 2006.

C. Ganguly, Sol-gel microsphere pelletization -a powder-free advanced process for fabrication of ceramic nuclear-fuel pellets, Bull Mater Sci, vol.16, pp.509-531, 1993.

C. Ganguly and P. V. Hegde, Sol-gel microsphere pelletisation process for fabrication of (U,Pu)O 2 , (U,Pu)C and (U,Pu)N fuel pellets for the prototype fast breeder reactor in India, J Sol-Gel Sci Technol, vol.9, pp.285-94, 1997.

G. Ledergerber, F. Ingold, R. W. Stratton, H. P. Alder, C. Prunier et al., Preparation of transuranium fuel and target materials for the transmutation of actinides by gel coconversion, Nucl Technol, vol.114, pp.194-204, 1996.

P. Haas and . Inventor, Loading a cation exchange resin with uranyl ions. US patent 3,800,023, 1974.

G. W. Weber, R. L. Beatty, and V. J. Tennery, Processing and composition control of weak-acid resin-derived fuel microspheres, Nucl Technol, vol.35, pp.217-243, 1977.

S. Picart, H. Mokhtari, I. Ramiere, and I. Jobelin, Preparation of minor actinides targets or blankets by means of ionic exchange resin, vol.9, 2009.

M. S. Wilson, A. Delariva, and F. H. Garzon, Synthesis of sub-2 nm ceria crystallites in carbon matrixes by simple pyrolysis of ion-exchange resins, J Mater Chem, vol.21, pp.7418-7442, 2011.

R. Ferreira and E. Jordao, A model for the behavior of thorium uranium mixed oxide kernels in the pelletizing process, J Nucl Mater, vol.350, pp.271-83, 2006.

S. Lowell, J. E. Shields, M. A. Thomas, and M. Thommes, Characterization of porous solids and powders: surface area pore size and density, 2004.

J. Rodríguez-carvajal, Recent advances in magnetic structure determination by neutron powder diffraction, Physica B: Phys Condens Matter, vol.192, pp.55-69, 1993.

R. Podor, N. Clavier, J. Ravaux, L. Claparede, N. Dacheux et al., Dynamic aspects of cerium dioxide sintering: HT-ESEM study of grain growth and pore elimination, J Eur Ceram Soc, vol.32, pp.353-62, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00638087

F. Helfferich, Ion exchange, 1962.

M. Marhol, Ion exchangers in analytical chemistry. Their properties and use in inorganic chemistry, Comprehensive analytical chemistry, 1982.

R. Arnold and L. Hing, Selectivity of carboxylic ion-exchange resin for lanthanide ions, J Chem Soc A -Inorg Phys Theor, vol.1967, pp.306-313

H. Mokhtari, Élaboration de précurseurs de combustibles ou cibles de transmutation mixtes d'actinides pour réacteurs de génération (IV) à partir de supports résines, 2008.

S. Picart, I. Ramiere, H. Mokhtari, and I. Jobelin, Experimental characterization and modelization of ion exchange kinetics for a carboxylic resin in infinite solution volume conditions application to monovalent-trivalent cations exchange, J Phys Chem B, vol.114, pp.11027-11065, 2010.

M. Wolcyrz, Rietveld refinement of the structure of CeOCl formed in Pd/CeO 2 catalyst -notes on the existence of a stabilized tetragonal phase of La 2 O 3 in La-Pd-O system, J Solid State Chem, vol.99, pp.409-422, 1992.

H. Guo and Y. Qiao, Preparation, structural and photoluminescent properties of CeO 2 :Eu 3+ films derived by Pechini sol-gel process, Appl Surf Sci, vol.254, pp.1961-1966, 2008.

P. A. Haas, J. P. Drago, D. L. Million, and R. D. Spence, Development, design, and preliminary operation of a resin-feed processing facility for resin-based HTGR fuels

J. M. Heintz and J. C. Bernier, Synthesis and sintering properties of cerium oxide powders prepared from oxalate precusors, J Phys, vol.47, pp.25-34, 1986.
URL : https://hal.archives-ouvertes.fr/jpa-00225488