Development of a new electroplating solution for electrodeposition of Au-Co alloys, Surface and Coatings Technology, vol.201, pp.1363-1372, 2006. ,
Development of new electrolytic and electroless gold plating processes for electronics applications, Science and Technology of Advanced Materials, vol.7, pp.425-437, 2006. ,
The effect of Tl (I) on the hard gold alloy electrodeposition of Au-Co from acid baths, Journal of Electroanalytical Chemistry, vol.645, pp.109-114, 2010. ,
Fractal analysis of the evolution of friction surfaces of galvanic AuNi coatings, Technical Physics Letters, vol.38, pp.484-487, 2012. ,
Composition, Structure & Hardness of Pulse-plated Nickel-hardened Gold Films, Proc. of The AESF Annual Technical Conference, 1995. ,
Application of a Doehlert experimental design to the optimization of an Au-Co plating electrolyte, Journal of applied electrochemistry, vol.34, pp.1177-1184, 2004. ,
Mechanical properties and microstructure of Au-Ni-TiO 2 nano-composite coatings, Materials characterization, vol.102, pp.189-194, 2015. ,
Characterizations of thermal stability and electrical performance of Au-Ni coating on CuCrZr substrate for high vacuum radio-frequency contact application, Thin Solid Films, vol.659, pp.81-88, 2018. ,
URL : https://hal.archives-ouvertes.fr/cea-02092152
An electrochemical study of Au-Ni alloy electrodeposition from cyanide-citrate electrolytes, Journal of Electroanalytical Chemistry, vol.577, pp.1-8, 2005. ,
Electrodeposition of amorphous Au-Ni alloy film, Electrochimica Acta, vol.53, 2008. ,
Mechanical and Electrical Properties of Au-Ni-C Alloy Films Produced by Pulsed Current Electrodeposition, Journal of The Electrochemical Society, vol.160, pp.513-518, 2013. ,
Soft gold coatings: influence of additives and pulse plating, Transactions of the IMF, vol.90, pp.246-251, 2012. ,
The effect of carbon nanotubes on the corrosion and tribological behavior of electroless Ni-P-CNT composite coating, Applied Surface Science, vol.258, pp.2439-2446, 2012. ,
Electrodeposition and mechanical properties of Ni-carbon nanotube nanocomposite coatings, Journal of Physics and Chemistry of Solids, vol.69, pp.1391-1394, 2008. ,
Preparation and corrosion behavior of Ni and Ni-graphene composite coatings, Materials Research Bulletin, vol.48, pp.1477-1483, 2013. ,
, Carbon nanofiber-copper composites fabricated by electroplating, Electrochemical and solid-state letters, vol.7, pp.25-26, 2004.
Self-lubricating and anti-corrosion amorphous carbon/Fe3C composite coating on M50NiL steel by low temperature plasma carburizing, Surface and Coatings Technology, vol.304, 2016. ,
Mechanical properties of nanostructured copper-hydrogenated amorphous carbon composite films studied by nanoindentation, Surface and Coatings Technology, vol.180, pp.551-555, 2004. ,
Evaluation of phase, composition, microstructure and properties in TiC/aC: H thin films deposited by magnetron sputtering, Applied Surface Science, vol.239, 2005. ,
Tribological behaviour of titanium carbide/amorphous carbon nanocomposite coatings: from macro to the micro-scale, Surface and Coatings Technology, vol.202, 2008. ,
Metal carbide/amorphous C-based nanocomposite coatings for tribological applications, Surface and Coatings Technology, vol.204, pp.947-954, 2009. ,
Preparation, biocompatibility, and biotribological properties of TiN-incorporated graphite-like amorphous carbon bio-ceramic composite films, Ceramics International, vol.44, 2018. ,
Gradient titanium and silver based carbon coatings deposited on AISI316L, Applied Surface Science, vol.275, pp.303-310, 2013. ,
Structural effects of nanocomposite films of amorphous carbon and metal deposited by pulsed-DC reactive magnetron sputtering, Diamond and Related Materials, vol.16, pp.1828-1834, 2007. ,
, SEM study of defects in PVD hard coatings, vol.82, pp.252-256, 2007.
Performance of HIPIMS deposited CrN/NbN nanostructured coatings exposed to 650 o C in pure steam environment, Materials Chemistry and Physics, vol.179, 2016. ,
Numerical evaluation of the exact phase diagram of an empirical Hamiltonian: Embedded atom model for the Au-Ni system, Physical Review B, vol.66, p.54201, 2002. ,
Comparison of Au and Au-Ni alloys as contact materials for MEMS switches, Journal of Microelectromechanical Systems, vol.18, pp.287-295, 2009. ,
Comparative surface and nano-tribological characteristics of nanocomposite diamond-like carbon thin films doped by silver, Applied Surface Science, vol.255, pp.2551-2556, 2008. ,
,
Noblest of all metals is structurally unstable at high pressure, Physical Review Letters, vol.98, p.45503, 2007. ,
Synthesis of hexagonal close-packed gold nanostructures, Nature Communications, vol.2, p.292, 2011. ,
Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD, World Journal of Nano Science and Engineering, vol.2, pp.154-160, 2012. ,
Controlled growth of hexagonal gold nanostructures during thermally induced self-assembling on Ge (001) surface, Scientific Reports, vol.7, p.42420, 2017. ,
Overview of Amorphous Carbon Films, 2017. ,
Amorphous self-lubricant MoS2-C sputtered coating with high hardness, Applied Surface Science, vol.331, pp.66-71, 2015. ,
Characterization of amorphous and nanocrystalline carbon films, Materials Chemistry and Physics, vol.96, pp.253-277, 2006. ,
Lubricated sliding wear mechanism of chromium-doped graphite-like carbon coating, Tribology International, vol.77, pp.186-195, 2014. ,
Interpretation of Raman spectra of disordered and amorphous carbon, Physical Review B, vol.61, p.14095, 2000. ,
Effect of carbon content on nanostructural, mechanical and electrochemical characteristics of self-organized nc-ZrCN/a-CN x nanocomposite films, Applied Surface Science, vol.327, pp.350-357, 2015. ,
Residual stress and cracking in thin PVD coatings, Vacuum, vol.64, pp.393-399, 2002. ,
Residual stress determination in thermally sprayed coatings-a comparison of curvature models and X-ray techniques, Surface and Coatings Technology, vol.200, pp.3955-3962, 2006. ,
State of residual stress in laser-deposited ceramic composite coatings on aluminum alloys, Acta Materialia, vol.55, pp.1203-1214, 2007. ,
Combinatorial study of gradient Ag-Al thin films: microstructure, phase formation, mechanical and electrical properties, ACS Applied Materials & Interfaces, vol.8, pp.30635-30643, 2016. ,
Effect of residual stresses on mechanical properties and interface adhesion strength of SiN thin films, Thin Solid Films, vol.517, pp.4857-4861, 2009. ,
Failure modes in scratch adhesion testing, Surface and Coatings Technology, vol.50, pp.25-32, 1991. ,
Study of tribological performance of ECR-CVD diamond-like carbon coatings on steel substrates: Part 2. The analysis of wear mechanism, Wear, vol.258, pp.1589-1599, 2005. ,