J. Hillairet, A. Argouarch, R. Bamber, B. Beaumont, J. Bernard et al., R&D activities on RF contacts for the ITER ion cyclotron resonance heating launcher, Fusion Eng. Des, vol.96, pp.477-481, 2015.
URL : https://hal.archives-ouvertes.fr/cea-01144581

S. Calatroni, R. Perret, and W. Vollenberg, RF contacts for the LHC Collimators, Nucl. Instrum. Meth. A, vol.566, pp.205-211, 2006.
DOI : 10.1016/j.nima.2006.06.068

S. Wikman, A. Peacock, O. Zlamal, J. Öijerholm, S. Tähtinen et al.,

S. Lorenzetto and . Heikkinen, Assessment of materials data for blanket materials within the European contribution to ITER, J. Nucl. Mater, vol.442, pp.414-419, 2013.

A. Chatterjee, R. Mitra, A. Chakraborty, C. Rotti, and K. Ray, Comparative study of approaches to assess damage in thermally fatigued Cu Cr Zr alloy, J. Nucl. Mater, vol.474, pp.120-125, 2016.

R. Niranjan, R. Rout, R. Srivastava, Y. Chakravarthy, P. Mishra et al., Surface modifications of fusion reactor relevant materials on exposure to fusion grade plasma in plasma focus device, Appl. Surf. Sci, vol.355, pp.989-998, 2015.

C. Obitz, J. Öijerholm, S. Wikman, and E. Bratu, Erosion corrosion of CuCrZr specimens exposed for simulated ITER operational conditions, Nucl. Mater. Energy, vol.9, pp.261-266, 2016.

L. Morgan, J. Shimwell, and M. Gilbert, Isotopically enriched structural materials in nuclear devices, Fusion Eng. Des, vol.90, pp.79-87, 2015.
DOI : 10.1016/j.fusengdes.2014.11.016

Y. Birol, Thermal fatigue testing of CuCrZr alloy for high temperature tooling applications, J. Mater. Sci, vol.45, pp.4501-4506, 2010.

L. Sun, N. Tao, and K. Lu, A high strength and high electrical conductivity bulk CuCrZr alloy with nanotwins, Scripta Mater, vol.99, pp.73-76, 2015.
DOI : 10.1016/j.scriptamat.2014.11.032

B. Zhang, Z. Zhang, and W. Li, Mechanical properties, electrical conductivity and microstructure of CuCrZr alloys treated with thermal stretch process, Trans. Nonferrous Met. Soc. China, vol.25, pp.2285-2292, 2015.

J. H. Zheng, W. Bogaerts, and P. Lorenzetto, Erosion-corrosion tests on ITER copper alloys in high temperature water circuit with incident heat flux, Fusion Eng. Des, vol.61, pp.649-657, 2002.

C. Shueh, C. Chan, C. Chang, and I. Sheng, Investigation of vacuum properties of CuCrZr alloy for high-heat-load absorber, Nucl. Instrum. Meth. A, vol.841, pp.1-4, 2017.

D. W. Lee, Y. D. Bae, S. K. Kim, S. H. Kim, B. G. Hong et al., Design evaluation of the semi-prototype for the ITER blanket first wall qualification, Thin Solid Films, vol.518, pp.6676-6681, 2010.

Z. Yang, D. J. Lichtenwalner, A. S. Morris, J. Krim, and A. I. Kingon, Comparison of Au and Au-Ni alloys as contact materials for MEMS switches, J. Microelectrome. S, vol.18, pp.287-295, 2009.

N. Togasaki, Y. Okinaka, T. Homma, and T. Osaka, Preparation and characterization of electroplated amorphous gold-nickel alloy film for electrical contact applications, Electrochimi. Acta, vol.51, pp.882-887, 2005.

R. Süss, E. Van-der-lingen, L. Glaner, and M. D. Toit, 18 carat yellow gold alloys with increased hardness, Gold Bull, vol.37, pp.196-207, 2004.

L. Chalumeau, M. Wery, H. Ayedi, M. Chabouni, and C. Leclere, Development of a new electroplating solution for electrodeposition of Au-Co alloys, Surf. Coat. Tech, vol.201, pp.1363-1372, 2006.

T. Osaka, Y. Okinaka, J. Sasano, and M. Kato, Development of new electrolytic and electroless gold plating processes for electronics applications, Sci. Technol. Adv. Mater, vol.7, pp.425-437, 2006.

A. Shugurov, A. Panin, A. Lyazgin, and E. Shesterikov, Fractal analysis of the evolution of friction surfaces of galvanic AuNi coatings, Tech. Phys. Lett+, pp.484-487, 2012.

E. Taylor, S. Baus, and A. Lawall, Increase in contact resistance of vacuum interrupters after shortcircuit testing, Proceedings of The 27th International Conference on Electrical Contacts, pp.1-4, 2014.

M. Vuolo, R. Bonifetto, S. Dulla, K. Heinola, I. Lengar et al.,

R. Widdowson and . Zanino, Evaluation of the neutron activation of JET in-vessel components following DT irradiation, Fusion Eng. Des, vol.89, pp.2071-2075, 2014.

M. R. Pinnel, Diffusion-related behaviour of gold in thin film systems, Gold Bull, vol.12, pp.62-71, 1979.

C. Huang, K. Li, W. Lin, and M. Liao, The behavior of electroplated hard-chromium on Cr-Mo steel subject to long-term annealing at 250° C, Mater. Sci. Engi. A, vol.403, pp.222-226, 2005.

S. Kim and J. Yu, Recrystallization-induced void migration in electroplated Cu films, Scripta Mater, vol.67, pp.312-315, 2012.

T. Malevu and R. Ocaya, Effect of annealing temperature on structural, morphology and optical properties of ZnO nano-needles prepared by zinc-air cell system method, Int. J. Electrochem. Sci, vol.10, pp.1752-1761, 2015.

M. Balden, P. Sauter, S. Jong, C. Adelhelm, S. Lindig et al., Carbide formation in tungsten-containing amorphous carbon films by annealing, Thin Solid Films, vol.519, pp.4049-4053, 2011.

V. Mote, Y. Purushotham, and B. Dole, Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles, J. Theor. App. Phys, vol.6, pp.1-8, 2012.

C. Carrasco, N. Mingolo, and J. Rí, The relationship between residual stress and process parameters in TiN coatings on copper alloy substrates, Mater. Charact, vol.48, pp.81-88, 2002.

C. P. Kumar, T. Venkatesha, and R. Shabadi, Preparation and corrosion behavior of Ni and Ni-graphene composite coatings, Mater. Res. Bull, vol.48, pp.1477-1483, 2013.

L. Marot, G. De-temmerman, V. Thommen, D. Mathys, and P. Oelhafen, Characterization of magnetron sputtered rhodium films for reflective coatings, Surf. Coat. Tech, vol.202, pp.2837-2843, 2008.

A. Monshi, M. R. Foroughi, and M. R. Monshi, Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD, World J. Nano Sci. Eng, vol.2, pp.154-160, 2012.

P. Yang, Y. Lai, S. Jian, J. Chen, and R. Chen, Nanoindentation identifications of mechanical properties of Cu 6 Sn 5, Cu 3 Sn, and Ni 3 Sn 4 intermetallic compounds derived by diffusion couples, Mater. Sci. Engi. A, vol.485, pp.305-310, 2008.

J. Ballarre, E. Jimenez-pique, M. Anglada, S. A. Pellice, and A. L. Cavalieri, Mechanical characterization of nano-reinforced silica based sol-gel hybrid coatings on AISI 316L stainless steel using nanoindentation techniques, Surf. Coat. Tech, pp.3325-3331, 2009.

S. Henke, W. Li, and A. K. Cheetham, Guest-dependent mechanical anisotropy in pillared-layered soft porous crystals-a nanoindentation study, Chem. Sci, vol.5, pp.2392-2397, 2014.

P. G. Allison, C. A. Weiss, R. D. Moser, A. Diaz, O. G. Rivera et al., Nanoindentation and SEM/EDX characterization of the geopolymer-to-steel interfacial transition zone for a reactive porcelain enamel coating, Compos. Part B-Eng, vol.78, pp.131-137, 2015.

C. Huang, P. Hsieh, I. Chen, W. Ke, P. Yang et al., Nanoindentation of Mg-doped AlGaN thin films, J. Alloy. Compd, vol.593, pp.220-223, 2014.

G. Cheng, X. Sun, Y. Wang, S. L. Tay, and W. Gao, Nanoindentation study of electrodeposited Ag thin coating: An inverse calculation of anisotropic elastic-plastic properties, Surf. Coat. Tech, pp.43-50, 2017.

K. Ansari, J. A. Van-kan, A. A. Bettiol, and F. Watt, Stamps for nanoimprint lithography fabricated by proton beam writing and nickel electroplating, J. Micromech. Microeng, vol.16, pp.1967-1974, 2006.

Z. Chen, J. Hillairet, V. Turq, Y. Song, Q. Yang et al.,

. Bernard, Multifunctional tribometer development and performance study of CuCrZr-316L material pair for ITER application, Tribol. Int, vol.116, pp.208-216, 2017.
URL : https://hal.archives-ouvertes.fr/cea-01851798