P. Agarwal, R. R. Neptune, and A. D. Deshpande, A simulation framework for virtual prototyping of robotic exoskeletons, J. Biomech. Eng, vol.138, issue.6, p.61004, 2016.

A. Blasdel, Y. Ikegami, K. Ayusawa, and Y. Nakamura, Balancing Anatomy and Function in a Musculoskeletal Model of Hands, pp.5130-5135, 2012.

R. Bogue, Exoskeletons and robotic prosthetics: a review of recent developments, Ind. Robot. Int. J, vol.36, issue.5, pp.421-427, 2009.

F. L. Buczek, E. W. Sinsel, D. S. Gloekler, B. M. Wimer, C. M. Warren et al., Kinematic performance of a six degree-of-freedom hand model (6DHand) for use in occupational biomechanics, J. Biomech, vol.44, issue.9, pp.1805-1809, 2011.

M. Cempini, A. Marzegan, M. Rabuffetti, M. Cortese, N. Vitiello et al., Analysis of relative displacement between the HX wearable robotic exoskeleton and the user's hand, J. NeuroEngineering Rehabil, vol.11, issue.1, p.147, 2014.

A. Chammas, M. Quaresma, and C. Mont'alvão, A closer look on the user centred design, Procedia Manuf, vol.3, pp.5397-5404, 2015.

L. Y. Chang and N. S. Pollard, Constrained least-squares optimization for robust estimation of center of rotation, J. Biomech, vol.40, issue.6, pp.1392-1400, 2007.

T. Chen and P. S. Lum, Hand rehabilitation after stroke using a wearable, high DOF, spring powered exoskeleton, 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp.578-581, 2016.

S. Durand, F. Marin, C. Oberlin, and M. Ho-ba-tho, Morphogenesis of the human palma arch using three-dimensional geometric modeling, Clin. Anat, vol.24, issue.7, pp.874-879, 2011.

P. Gerus, M. Sartori, T. F. Besier, B. J. Fregly, S. L. Delp et al., Subject-specific knee joint geometry improves predictions of medial tibiofemoral contact forces, J. Biomech, vol.46, issue.16, pp.2778-2786, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01767637

F. Gonzalez, F. Gosselin, and W. Bachta, Analysis of hand contact areas and interaction capabilities during manipulation and exploration, IEEE Trans. Haptics, vol.7, issue.4, pp.415-429, 2014.
URL : https://hal.archives-ouvertes.fr/cea-01820323

F. Gosselin, Guidelines for the design of multi-finger haptic interfaces for the hand, Romansy 19-Robot Design, vol.544, pp.167-174, 2013.

M. Grebenstein, M. Chalon, W. Friedl, S. Haddadin, T. Wimbock et al., The hand of the DLR hand arm system: designed for interaction, Int. J. Robot. Res, vol.31, issue.13, pp.1531-1555, 2012.

T. Greiner, Hand Anthropometry of US Army Personnel, ARMY NATICK Res. Dev. Eng. Cent. MA, 1991.

S. Guo, F. Zhang, W. Wei, F. Zhao, and Y. Wang, Kinematic analysis of a novel exoskeleton finger rehabilitation robot for stroke patients, 2014 IEEE International Conference on Mechatronics and Automation, pp.924-929, 2014.

C. Hansen, K. Ben-mansour, P. Devos, and F. Marin, Small cause, great impact: a sensitivity study in musculoskeletal modelling of the hand, Comput. Methods Biomech. Biomed. Engin, vol.17, pp.114-115, 2014.

P. Heo, G. M. Gu, S. Lee, K. Rhee, and J. Kim, Current hand exoskeleton technologies for rehabilitation and assistive engineering, Int. J. Precis. Eng. Manuf, vol.13, issue.5, pp.807-824, 2012.

I. Jo, J. Lee, Y. Park, and J. Bae, Design of a wearable hand exoskeleton for exercising flexion/extension of the fingers, 2017 International Conference on Rehabilitation Robotics (ICORR), pp.1615-1620, 2017.

L. Jones, Dextrous hands: human, prosthetic, and robotic, Presence Teleoperators Virtual Environ, vol.6, issue.1, pp.29-56, 1997.

A. Kapandji, The Physiology of the Joints, vol.1, 2007.

M. L. Latash, J. P. Scholz, and G. Schöner, Motor control strategies revealed in the structure of motor variability, Exerc Sport Sci. Rev, vol.30, issue.1, pp.26-31, 2002.

P. Levangie and C. Norkin, Joint Structure and Function: a Comprehensive Analysis, 2005.

J. Li, . Zheng, . Ruoyin, . Zhang, . Yuru et al., iHandRehab: an Interactive Hand Exoskeleton for Active and Passive Rehabilitation, pp.1-6, 2011.

J. A. Martinez, P. Ng, . Lu, . Son, M. S. Campagna et al., Design of Wrist Gimbal: a Forearm and Wrist Exoskeleton for Stroke Rehabilitation, pp.1-6, 2013.

D. S. Moore and G. Mccabe, Introduction to the Practice of Statistics, 2006.

F. M. Mozaffari, M. Troncossi, and C. V. Parenti, State-of-the-Art of Hand Exoskeleton Systems, 2011.

B. Nigg and W. Herzog, Biomechanics of the Musculo-skeletal System, 2007.

M. B. Privitera, M. Evans, and D. Southee, Human factors in the design of medical devices-approaches to meeting international standards in the European Union and USA, Appl. Ergon, vol.59, pp.251-263, 2017.

A. Schiele and F. Van-der-helm, Kinematic design to improve ergonomics in humanmachine interaction, IEEE Trans. Neural Syst. Rehabil. Eng, vol.14, issue.4, pp.456-459, 2006.

J. Theurel, K. Desbrosses, T. Roux, and A. Savescu, Physiological consequences of using an upper limb exoskeleton during manual handling tasks, Appl. Ergon, vol.67, pp.211-217, 2018.

G. Valente, L. Pitto, D. Testi, A. Seth, S. L. Delp et al., Are subject-specific musculoskeletal models robust to the uncertainties in parameter identification?, PLoS One, vol.9, issue.11, p.112625, 2014.

N. Vignais and F. Marin, Analysis of the musculoskeletal system of the hand and forearm during a cylinder grasping task, Int. J. Ind. Ergon, vol.44, issue.4, pp.535-543, 2014.

N. Vignais, M. Miezal, G. Bleser, K. Mura, D. Gorecky et al., Innovative system for real-time ergonomic feedback in industrial manufacturing, Appl. Ergon, vol.44, issue.4, pp.566-574, 2013.

H. K. Yap, J. H. Lim, F. Nasrallah, J. Cho-hong-goh, and C. Yeow, Characterisation and evaluation of soft elastomeric actuators for hand assistive and rehabilitation applications, J. Med. Eng. Technol, vol.40, issue.4, pp.199-209, 2016.

. Fig, The prototype of the MANDARIN hand exoskeleton validated in silico before manufacturing