K. Bien-aimé, C. Belin, L. Gallais, P. Grua, E. Fargin et al., Impact of storage induced outgassing organic contamination on laser induced damage of silica optics at 351 nm, Optics Express, vol.17, issue.21, pp.18703-18713, 2009.
DOI : 10.1364/OE.17.018703

G. Guéhenneux, M. Veillerot, and I. , Evaluation of the airborne molecular contamination inside the LIL, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.557, issue.2, pp.676-683, 2006.
DOI : 10.1016/j.nima.2005.11.116

J. A. Muscari and P. Westcott, Optical contamination evidence from Skylab and Gemini flights, Applied Optics, vol.14, issue.12, pp.2883-2891, 1975.
DOI : 10.1364/AO.14.002883

W. R. Hunter, Optical contamination: its prevention in the XUV spectrographs flown by the US Naval Research Laboratory in the Apollo Telescope Mount, Applied Optics, vol.16, issue.4, pp.16-909, 1977.
DOI : 10.1364/AO.16.000909

E. Grossman and I. Gouzman, Space environment effects on polymers in low earth orbit, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol.208, pp.48-57, 2003.
DOI : 10.1016/S0168-583X(03)00640-2

B. M. Mertens, B. Van-der-zwan, P. W. De-jager, M. Leenders, H. G. Werij et al., Mitigation of surface contamination from resist outgassing in EUV lithography, Microelectronic Engineering, vol.53, issue.1-4, pp.53-659, 2000.
DOI : 10.1016/S0167-9317(00)00399-3

D. Lu, R. Kumar, C. Chang, A. Du, and T. K. Wong, Analysis of surface contamination on organosilicate low k dielectric materials, Microelectronic Engineering, vol.77, issue.1, pp.77-63, 2005.
DOI : 10.1016/j.mee.2004.08.006

D. Zhang, Y. Wang, and Y. Gan, Characterization of critically cleaned sapphire single-crystal substrates by atomic force microscopy, XPS and contact angle measurements, Applied Surface Science, vol.274, pp.405-417, 2013.
DOI : 10.1016/j.apsusc.2012.12.143

A. E. Duisterwinkel, A. T. Bastein, and W. Van-schaik, Feasibility of UV cleaning of 157-nm reticles, Microelectronic Engineering, vol.67, issue.68, pp.67-68, 2003.
DOI : 10.1016/S0167-9317(03)00166-7

C. Savall, A. Godon, J. Creus, and X. Feaugas, Influence of deposition parameters on microstructure and contamination of electrodeposited nickel coatings from additive-free sulphamate bath, Surface and Coatings Technology, vol.206, issue.21, pp.206-4394, 2012.
DOI : 10.1016/j.surfcoat.2012.04.068

M. J. Soileau, W. E. Williams, E. W. Van-stryland, and M. A. Woodall, Laser-induced damage measurements in CdTe and other II???VI materials, Applied Optics, vol.21, issue.22, pp.4059-4062, 1982.
DOI : 10.1364/AO.21.004059

F. Y. Génin, M. D. Feit, M. R. Kozlowski, A. M. Rubenchick, A. Salleo et al., Rear-surface laser damage on 355-nm silica optics owing to Fresnel diffraction on front-surface contamination particles, Applied Optics, vol.39, issue.21, pp.39-3654, 2000.
DOI : 10.1364/AO.39.003654

X. Li and J. Shen, The stability of sol???gel silica coatings in vacuum with organic contaminants, Journal of Sol-Gel Science and Technology, vol.18, issue.463, pp.539-545, 2011.
DOI : 10.1023/A:1008787722437

X. Wang and J. Shen, A review of contamination-resistant antireflective sol???gel coatings, Journal of Sol-Gel Science and Technology, vol.33, issue.3, pp.61-206, 2011.
DOI : 10.1117/1.2965541

Y. Cui, Y. Zhao, H. Yu, H. He, and J. Shao, Impact of organic contamination on laser-induced damage threshold of high reflectance coatings in vacuum, Applied Surface Science, vol.254, issue.18, pp.5990-5993, 2008.
DOI : 10.1016/j.apsusc.2008.03.185

D. Ristau, M. Jupé, and K. Starke, Laser damage thresholds of optical coatings, Thin Solid Films, vol.518, issue.5, pp.1607-1613, 2009.
DOI : 10.1016/j.tsf.2009.07.150

X. Ling, Y. Zhao, D. Li, J. Shao, and Z. Fan, Damage investigations of AR coating under atmospheric and vacuum conditions, Optics & Laser Technology, vol.41, issue.7, pp.41-857, 2009.
DOI : 10.1016/j.optlastec.2009.03.005

]. X. Ling, Y. Zhao, D. Li, S. Li, M. Zhou et al., Impact of organic contamination on the laser-induced damage in vacuum, Applied Surface Science, vol.255, issue.22, pp.255-9255, 2009.
DOI : 10.1016/j.apsusc.2009.07.012

X. Ling, Y. Zhao, J. Shao, and Z. Fan, Effect of two organic contamination modes on laser-induced damage of high reflective films in vacuum, Thin Solid Films, vol.519, issue.1, pp.296-300, 2010.
DOI : 10.1016/j.tsf.2010.08.016

X. Ling, G. Wang, Y. Zhao, X. Liu, and J. Shao, Laser-induced damage of the optical coatings due to organic contamination in vacuum, Applied Surface Science, vol.270, pp.346-351, 2013.
DOI : 10.1016/j.apsusc.2013.01.028

X. Ling, Y. Zhao, X. Liu, M. Zhou, J. Shao et al., Comparative study of laser-induced damage of two reflective coatings in vacuum due to organic contamination, Optik - International Journal for Light and Electron Optics, vol.123, issue.16, pp.1453-1456, 2012.
DOI : 10.1016/j.ijleo.2011.09.009

W. Riede, P. Allenspacher, H. Schröder, D. Wernham, and Y. Lien, Laser-induced hydrocarbon contamination in vacuum, Laser-Induced Damage in Optical Materials: 2005, 2005.
DOI : 10.1117/12.638765

W. Riede, H. Schröder, G. Bataviciute, D. Wernham, A. Tighe et al., Laser-induced contamination on space optics, Laser-Induced Damage in Optical Materials: 2011, 2011.
DOI : 10.1117/12.899190

M. Keller, U. Gommel, and A. Verl, Measurement and classification method regarding the emission of volatile organic compounds from cleanrooms materials, International Symposium on Contamination Control ICCCS 2012, 2012.

B. Mangote, I. Tovena-pécault, and J. Néauport, Decontamination of optics before organic contamination study and impact on the optics performance, International Symposium on Contamination Control ICCCS 2012, 2012.

I. Tovena-pécault and B. Mangote, Analyse de la contamination chimique d'optiques par chromatographie gazeuse couplée à la spectrométrie de masse, 2013.

P. Belleville, P. Prené, C. Bonnin, L. Beaurain, Y. Montouillout et al., How smooth chemistry allows high-power laser optical coating preparation, Advances in Optical Thin Films, pp.196-202, 2011.
DOI : 10.1117/12.513680

P. Belleville, Functional coatings: The sol-gel approach, Comptes Rendus Chimie, vol.13, issue.1-2, pp.97-105, 2010.
DOI : 10.1016/j.crci.2009.12.005

J. Néauport, L. Lamaignère, H. Bercegol, and F. Pilon, Polishing-induced contamination of fused silica optics and laser induced damage density at 351 nm, Optics Express, vol.13, issue.25, pp.10163-10171, 2005.
DOI : 10.1364/OPEX.13.010163

J. Néauport, P. Cormont, L. Lamaignère, C. Ambard, F. Pilon et al., Concerning the impact of polishing induced contamination of fused silica optics on the laser-induced damage density at 351 nm, Opt. Commun, pp.281-3802, 2008.

E. Gallego, F. J. Roca, J. F. Perales, and X. Guardino, Comparative study of the adsorption performance of a multi-sorbent bed (Carbotrap, Carbopack X, Carboxen 569) and a Tenax TA adsorbent tube for the analysis of volatile organic compounds (VOCs), Talanta, vol.81, issue.3, pp.916-924, 2010.
DOI : 10.1016/j.talanta.2010.01.037