S. Trolier-mckinstry and P. Muralt, Thin film piezoelectrics for MEMS, Journal of Electroceramics, vol.12, 2004.

R. E. Jones, P. Zurcher, P. Chu, D. J. Taylor, Y. T. Lii et al., Memory applications based on ferroelectric and high-permittivity dielectric thin films, Microelectronic Engineering, vol.29, issue.1-4, pp.3-10, 1995.
DOI : 10.1016/0167-9317(95)00106-9

S. Tadigadapa and K. Mateti, Piezoelectric MEMS sensors: state-of-theart and perspectives, Measurement Science and Technology, vol.2020, issue.9, 2009.

R. L. Holman and R. M. Fulrath, Intrinsic nonstoichiometry in the lead zirconate???lead titanate system determined by Knudsen effusion, Journal of Applied Physics, vol.44, issue.12, pp.5227-5236, 1973.
DOI : 10.1063/1.1662136

A. Etin, G. E. Shter, R. Brener, S. Baltianski, and G. S. Grader, Surface Composition and Imprint in CSD-Based PZT Films, Journal of the American Ceramic Society, vol.227, issue.0, 2007.
DOI : 10.1002/(SICI)1521-4079(200001)35:1<77::AID-CRAT77>3.0.CO;2-V

B. Vaidhyanathan, A. P. Singh, D. K. Agrawal, T. R. Shrout, R. Roy et al., Microwave Effects in Lead Zirconium Titanate Synthesis: Enhanced Kinetics and Changed Mechanisms, Journal of the American Ceramic Society, vol.21, issue.8, 2004.
DOI : 10.1111/j.1151-2916.2001.tb00816.x

T. Tani and D. Payne, Lead Oxide Coatings on Sol-Gel-Derived Lead Lanthanum Zirconium Titanate Thin Layers for Enhanced Crystallization into the Perovskite Structure, Journal of the American Ceramic Society, vol.44, issue.12, 1994.
DOI : 10.1111/j.1151-2916.1994.tb05398.x

Y. Park, K. W. Jeong, and J. T. Song, Effect of excess Pb on fatigue properties of PZT thin films prepared by rf-magnetron sputtering, Materials Letters, vol.56, issue.4, pp.481-485, 2002.
DOI : 10.1016/S0167-577X(02)00536-0

A. Sachdeva, M. Kumar, V. Luthra, and R. P. Tandon, Phase evolution studies of sol???gel derived lead zirconate titanate (PZT) nanopowder using X-ray diffraction and X-ray photoelectron spectroscopy, Applied Physics A, vol.253, issue.1???3, pp.103-108, 2011.
DOI : 10.1007/s00339-011-6301-8

J. Wang, J. M. Xue, D. M. Wan, and B. K. Gan, Mechanically Activating Nucleation and Growth of Complex Perovskites, Journal of Solid State Chemistry, vol.154, issue.2, pp.321-328, 2000.
DOI : 10.1006/jssc.2000.8782

D. Liu, C. Wang, H. Zhang, J. Li, L. Zhao et al., Domain configuration and interface structure analysis of sol-gel-derived PZT ferroelectric thin films, Surface and Interface Analysis, vol.65, issue.1, pp.27-31, 2001.
DOI : 10.1002/sia.999

C. K. Kwok and S. B. Desu, Pyrochlore to perovskite phase transformation in sol???gel derived lead???zirconate???titanate thin films, Applied Physics Letters, vol.60, issue.12, pp.1430-1432, 1992.
DOI : 10.1063/1.107312

L. A. Bursill and K. G. Brooks, Crystallization of sol???gel derived lead???zirconate???titanate thin films in argon and oxygen atmospheres, Journal of Applied Physics, vol.75, issue.9, pp.4501-4509, 1994.
DOI : 10.1063/1.355941

M. Subramanian, G. Aravamudan, and G. S. Rao, Oxide pyrochlores ??? A review, Progress in Solid State Chemistry, vol.15, issue.2, pp.55-14310, 1983.
DOI : 10.1016/0079-6786(83)90001-8

A. D. Polli, F. F. Lange, and C. G. Levi, Metastability of the Fluorite, Pyrochlore, and Perovskite Structures in the PbO-ZrO2-TiO2 System, Journal of the American Ceramic Society, vol.18, issue.2, p.000086506800030, 2000.
DOI : 10.1111/j.1151-2916.2000.tb01288.x

A. Bose and M. Sreemany, Influence of processing conditions on the structure, composition and ferroelectric properties of sputtered PZT thin films on Ti-substrates, Applied Surface Science, vol.289, pp.551-559, 2014.
DOI : 10.1016/j.apsusc.2013.11.041

M. S. Silva, M. Cilense, E. Orhan, M. S. Góes, M. A. Machado et al., The nature of the photoluminescence in amorphized PZT, Journal of Luminescence, vol.111, issue.3, pp.205-213, 2005.
DOI : 10.1016/j.jlumin.2004.08.045

A. Etin, G. E. Shter, G. S. Grader, and G. M. Reisner, Interrelation of ferroelectricity, morphology, and thickness in sol-gel-derived PbZrxTi1- xO3 films, Journal of the American Ceramic Society, vol.90, 2007.

R. H. Liang, D. Rémiens, C. Soyer, N. Sama, X. L. Dong et al., Etching characteristics and absence of electrical properties damage of PZT thin films etched before crystallization, Microelectronic Engineering, vol.85, issue.4, pp.670-674, 2008.
DOI : 10.1016/j.mee.2007.12.031

URL : https://hal.archives-ouvertes.fr/hal-00360094

J. L. Wang, F. Gaillard, A. Pancotti, B. Gautier, G. Niu et al., Thin Film after Dissociative Adsorption of Water, The Journal of Physical Chemistry C, vol.116, issue.41, pp.21802-21809, 2012.
DOI : 10.1021/jp305826e

URL : https://hal.archives-ouvertes.fr/hal-00777517

G. N. Greaves, N. T. Barrett, G. M. Antonini, F. R. Thornley, B. T. Willis et al., Glancing angle X-Ray absorption spectroscopy of corroded Borsilicate glass surfaces containg Uranium, J. Am. Chem. Soc, vol.111, issue.22, 1989.

L. G. Parratt, Surface Studies of Solids by Total Reflection of X-Rays, Physical Review, vol.95, issue.2, 1954.
DOI : 10.1103/PhysRev.95.359

J. K. Lee, T. Kim, I. Chung, and S. B. Desu, Characterization and elimination of dry etching damaged layer in Pt/Pb(Zr[sub 0.53]Ti[sub 0.47])O[sub 3]/Pt ferroelectric capacitor, Applied Physics Letters, vol.75, 1999.

J. D. Baniecki, M. Ishii, T. Shioga, K. Kurihara, and S. Miyahara, Surface core-level shifts of strontium observed in photoemission of barium strontium titanate thin films, Applied Physics Letters, vol.89, issue.16, p.1, 2006.
DOI : 10.1063/1.2357880

J. N. Kim, K. S. Shin, D. H. Kim, B. O. Park, N. K. Kim et al., Changes in chemical behavior of thin film lead zirconate titanate during Ar+-ion bombardment using XPS, Applied Surface Science, vol.206, issue.1-4, pp.119-128, 2003.
DOI : 10.1016/S0169-4332(02)01229-1

S. A. Chambers, T. Droubay, T. C. Kaspar, M. Gutowski, and M. Van-schilfgaarde, Accurate valence band maximum determination for SrTiO3(001), Surface Science, vol.554, issue.2-3, pp.81-89, 2004.
DOI : 10.1016/j.susc.2004.02.021

T. J. Zhu, X-ray diffraction and photoelectron spectroscopic studies of (001)-oriented Pb(Zr[sub 0.52]Ti[sub 0.48])O[sub 3] thin films prepared by laser ablation, Journal of Applied Physics, vol.95, issue.001, 2004.

A. Zomorrodian, A. Mesarwi, N. J. Wu, and A. Ignatiev, XPS oxygen line broadening in lead zirconium titanate and related materials, Applied Surface Science, vol.90, issue.3, pp.343-348, 1995.
DOI : 10.1016/0169-4332(95)00155-7

J. Abergel, M. Allain, H. Michaud, M. Cueff, T. Ricart et al., Optimized gradient-free PZT thin films for micro-actuators, 2012 IEEE International Ultrasonics Symposium, pp.972-974
DOI : 10.1109/ULTSYM.2012.0243

S. A. Impey, Z. Huang, A. Patel, R. Beanland, N. M. Shorrocks et al., Microstructural characterization of sol???gel lead???zirconate???titanate thin films, Journal of Applied Physics, vol.83, issue.4, 1998.
DOI : 10.1063/1.366957

N. Wakiya, K. Kuroyanagi, Y. Xuan, K. Shinozaki, and N. Mizutani, An XPS study of the nucleation and growth behavior of an epitaxial Pb(Zr,Ti)O3/MgO(100) thin film prepared by MOCVD, Thin Solid Films, vol.372, issue.1-2, pp.156-162, 2000.
DOI : 10.1016/S0040-6090(00)01013-0

C. Soyer, E. Cattan, and D. , Ion beam etching of PZT thin films: Influence of grain size on the damages induced, Journal of the European Ceramic Society, vol.25, issue.12, 2005.
DOI : 10.1016/j.jeurceramsoc.2005.03.043

URL : https://hal.archives-ouvertes.fr/hal-00138431

C. S. Park, J. W. Lee, S. M. Lee, S. H. Jun, and H. E. Kim, Effect of excess PbO on microstructure and orientation of PZT(60/40) films, Journal of Electroceramics, vol.20, issue.356, pp.20-25, 2010.
DOI : 10.1007/s10832-009-9584-9

R. Vaidya, R. J. Simonson, J. Cesarano, D. Dimos, and G. P. López, Formation and Stability of Self-Assembled Monolayers on Thin Films of Lead Zirconate Titanate (PZT), Langmuir, vol.12, issue.11, pp.2830-2836, 1996.
DOI : 10.1021/la951072k

/. Au and . Pb, Ti)O3 investigated by X-ray photoelectron spectroscopy: Dependence on the initial state of the film, Thin Solid Films, vol.545, 2013.

N. G. Apostol, L. E. Stoflea, G. A. Lungu, C. Chirila, L. Trupina et al., Charge transfer and band bending at Au/Pb(Zr0.2Ti0.8)O3 interfaces investigated by photoelectron spectroscopy, Applied Surface Science, vol.273, pp.415-425, 2013.
DOI : 10.1016/j.apsusc.2013.02.056

M. M. Zhu, Z. H. Du, and J. Ma, Defect enhanced optic and electro-optic properties of lead zirconate titanate thin films, AIP Advances, vol.1, issue.4
DOI : 10.1063/1.3664137

M. H. Tang, J. Zhang, X. L. Xu, H. Funakubo, Y. Sugiyama et al., Electrical properties and x-ray photoelectron spectroscopy studies of Bi(Zn[sub 0.5]Ti[sub 0.5])O[sub 3] doped Pb(Zr[sub 0.4]Ti[sub 0.6])O[sub 3] thin films, Journal of Applied Physics, vol.108, 2010.

S. W. Lee, S. H. Joo, S. L. Cho, Y. H. Son, K. M. Lee et al., Plasma-Assisted Dry Etching of Ferroelectric Capacitor Modules and Application to a 32M Ferroelectric Random Access Memory Devices with Submicron Feature Sizes, Japanese Journal of Applied Physics, vol.41, issue.Part 1, No. 11B, pp.6749-6753, 2002.
DOI : 10.1143/JJAP.41.6749

S. Takatani, H. Miki, K. Kushida-abdelghafar, and K. Torii, Pt/PbZrxTi1???xO3 interfacial reaction and Schottky barrier formation studied by x-ray photoelectron spectroscopy: Effect of H2 and O2 annealing, Journal of Applied Physics, vol.85, issue.11, p.000080354300040, 1999.
DOI : 10.1063/1.370585

M. G. Kang, K. T. Kim, and C. I. Kim, Recovery of plasma-induced damage in PZT thin film with O2 gas annealing, Thin Solid Films, pp.398-399, 2001.

A. C. Galca, V. Stancu, M. A. Husanu, C. Dragoi, N. G. Gheorghe et al., Substrate???target distance dependence of structural and optical properties in case of Pb(Zr,Ti)O3 films obtained by pulsed laser deposition, Applied Surface Science, vol.257, issue.14, pp.5938-5943, 2011.
DOI : 10.1016/j.apsusc.2011.01.056

D. W. Zeng, K. Li, K. C. Yung, H. L. Chan, C. L. Choy et al., UV laser micromachining of piezoelectric ceramic using a pulsed Nd:YAG laser, Applied Physics A, vol.172, issue.3, pp.415-421, 2004.
DOI : 10.1016/S0169-4332(00)00883-7

Y. Y. Lin, Q. Liu, T. A. Tang, and X. Yao, XPS analysis of Pb(Zr0.52Ti0.48)O3 thin film after dry-etching by CHF3 plasma, Applied Surface Science, vol.165, issue.1, pp.34-37, 2000.
DOI : 10.1016/S0169-4332(00)00316-0

C. Dragoi, N. G. Gheorghe, G. A. Lungu, L. Trupina, A. G. Ibanescu et al., X-ray photoelectron spectroscopy of pulsed laser deposited Pb(Zr,Ti)O3?, Physica Status Solidi (a), vol.209, issue.6, 201127740.

Y. Gao, L. Zhang, Y. Pan, G. Wang, Y. Xu et al., Epitaxial growth of ultrathin ZrO2(111) films on Pt(111), Chinese Science Bulletin, vol.78, issue.6, pp.502-507, 2011.
DOI : 10.1007/s11434-010-4309-7

H. Kim, J. Woo, Y. Joo, and C. Kim, The Use of Inductively Coupled CF 4 /Ar Plasma to Improve the Etch Rate of ZrO 2 Thin Films, Transactions on Electrical and Electronic Materials, vol.14, issue.1

R. M. Física and D. , Structural changes in ZrO x N y / ZrO 2 coatings deposited through spray pyrolisis-nitriding, Revista Mexicana de Física, vol.60, pp.233-242, 2014.

G. I. Cubillos, M. Bethencourt, J. J. Olaya, J. E. Alfonso, and J. F. Marco, The influence of deposition temperature on microstructure and corrosion resistance of ZrOxNy/ZrO2 coatings deposited using RF sputtering, Applied Surface Science, vol.309, pp.181-187, 2014.
DOI : 10.1016/j.apsusc.2014.04.215

R. Brenier, J. Mugnier, and E. Mirica, XPS study of amorphous zirconium oxide films prepared by sol???gel, Applied Surface Science, vol.143, issue.1-4, pp.85-9110, 1999.
DOI : 10.1016/S0169-4332(98)00901-5

Y. Pan, Y. Gao, D. Kong, G. Wang, J. Hou et al., Interaction of Au with thin ZrO2 films: influence of ZrO2 morphology on the adsorption and thermal stability of Au nanoparticles, Langmuir, vol.28, 2012.

V. R. Chinchamalatpure, Synthesis and Electrical Characterization of ZrO2 Thin Films on Si(100), Journal of Modern Physics, vol.03, issue.01
DOI : 10.4236/jmp.2012.31010

J. Woo, S. Kim, J. Koo, G. Kim, D. Kim et al., A study on dry etching for profile and selectivity of ZrO2 thin films over Si by using high density plasma, Thin Solid Films, vol.517, issue.14, 2009.
DOI : 10.1016/j.tsf.2009.02.012

L. M. Eshelman, A. M. De-jong, and J. W. Niemantsverdriet, Preparation of ZrO2 on flat, conducting SiO2/Si(100) model supports by wet chemical techniques; X-ray photoelectron spectroscopy and Auger depth profiling, Catalysis Letters, vol.32, issue.3-4, pp.201-209, 1991.
DOI : 10.1007/BF00772072

J. Woo, C. Choi, W. Yang, Y. Chun, and C. Kim, Surface properties of ZrO2 thin film under Cl2 / Ar plasma using angle-resolved X-ray photoelectron spectroscopy Surface properties of ZrO 2 thin fi lm under Cl 2 / Ar plasma, Japanese Journal of Applied Physics, vol.53, pp.8-13, 2014.

C. Lin, C. Zhang, and J. Lin, Powders Prepared via the Pechini-type Sol???Gel Process, The Journal of Physical Chemistry C, vol.111, issue.8, pp.3300-3307, 2007.
DOI : 10.1021/jp066615l

J. Robertson, High dielectric constant oxides, The European Physical Journal Applied Physics, vol.28, issue.3, pp.265-291, 2004.
DOI : 10.1051/epjap:2004206

P. W. Peacock and J. Robertson, Band offsets and Schottky barrier heights of high dielectric constant oxides, Journal of Applied Physics, vol.92, issue.8, pp.4712-4721, 2002.
DOI : 10.1063/1.1506388

C. Soyer, E. Cattan, D. R. `-emiens, and M. Guilloux-viry, Ion beam etching of lead???zirconate???titanate thin films: Correlation between etching parameters and electrical properties evolution, Journal of Applied Physics, vol.92, issue.2, pp.1048-1055, 2002.
DOI : 10.1063/1.1476970

R. Moazzami, C. Hu, and W. H. Shepherd, Electrical characteristics of ferroelectric PZT thin films for DRAM applications, IEEE Transactions on Electron Devices, vol.39, issue.9, pp.2044-2049, 1992.
DOI : 10.1109/16.155876