M. Abdalla, Design of a piezoelectric actuator and compliant mechanism combination for maximum energy efficiency, Smart Materials and Structures, vol.14, issue.6, pp.1421-1430, 2005.
DOI : 10.1088/0964-1726/14/6/035

A. Albut, Q. Zhou, C. Del-corral, and H. N. Koivo, Development of a flexible force-controlled piezo-bimorph microgripping system, Proc. of the 2 nd VDE World Microtechnologies Congress, Micro.tec2003, pp.507-512, 2003.

G. Allaire, Shape Optimization by the Homogenization Method, 2001.

G. Allaire and F. Jouve, Optimal design of micro-mechanisms by the homogenization method, Revue Europ??enne des ??l??ments Finis, vol.48, issue.6, pp.405-416, 2002.
DOI : 10.1080/08905459708945415

G. Allaire, F. Jouve, and A. Toader, A level-set method for shape optimization, Comptes Rendus Mathematique, vol.334, issue.12, pp.1125-1130, 2002.
DOI : 10.1016/S1631-073X(02)02412-3
URL : https://hal.archives-ouvertes.fr/hal-01336301

G. Allaire, F. Jouve, and A. Toader, Structural optimization using sensitivity analysis and a level-set method, Journal of Computational Physics, vol.194, issue.1, pp.363-393, 2004.
DOI : 10.1016/j.jcp.2003.09.032

G. Allaire and F. Jouve, A level-set method for vibration and multiple loads structural optimization, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.30-33, pp.3269-3290, 2005.
DOI : 10.1016/j.cma.2004.12.018

G. K. Ananthasuresh, S. Kota, and Y. Gianchandani, A methodical approach to design of compliant micro-mechanisms, Solid-State Sensor and ActuatorWorkshop, pp.189-192, 1994.

G. K. Ananthasuresh and S. Kota, Designing compliant mechanisms, Mech. Eng. ASME, vol.117, issue.11, pp.93-96, 1995.

R. Barboni, Optimal placement of PZT actuators for the control of beam dynamics, Smart Materials and Structures, vol.9, issue.1, pp.110-120, 2000.
DOI : 10.1088/0964-1726/9/1/312

D. W. Begg and X. Liu, On simultaneous optimization of smart structures ??? Part II: Algorithms and examples, Computer Methods in Applied Mechanics and Engineering, vol.184, issue.1, pp.25-37, 2000.
DOI : 10.1016/S0045-7825(99)00317-5

M. Bendsøe, Optimization of Structural Topology, Shape and Material, 1995.
DOI : 10.1007/978-3-662-03115-5

M. Bendsøe and O. Sigmund, Topology Optimization: Theory, Methods and Applications, 2003.

P. Bernardoni, P. Bidaud, C. Bidard, and F. Gosselin, A new compliant mechanism design methodology based on flexible building blocks, Smart Structures and Materials 2004: Modeling, Signal Processing, and Control, 2004.
DOI : 10.1117/12.539498

P. Bernardoni, From the mechanical analysis of a polyarticulated microgripper to the design of a compliant microgripper, Smart Structures and Materials 2004: Modeling, Signal Processing, and Control, 2004.
DOI : 10.1117/12.539526
URL : https://hal.archives-ouvertes.fr/hal-00141169

P. Bernardoni, Outils et méthodes de conception de structures mécaniques à déformations réparties et actionnement discret - Applications en microrobotique, 2004.

P. Bernardoni, Une nouvelle méthode de conception de structures mécaniques à déformations réparties et actionnement discret Application sur une micro-pince, 17 ème Congrès Français de Mécanique, 2005.

S. Bütefish, V. Seidemann, and S. Büttgenbach, Novel micro-pneumatic actuator for MEMS, Sensors and Actuators A: Physical, vol.97, issue.98, pp.97-98, 2002.
DOI : 10.1016/S0924-4247(01)00843-3

R. C. Carbonari, E. C. Silva, and S. Nishiwaki, Design of piezoelectric multi-actuated microtools using topology optimization, Smart Materials and Structures, vol.14, issue.6, pp.1431-1447, 2005.
DOI : 10.1088/0964-1726/14/6/036

H. C. Chang, J. M. Tsai, H. C. Tsai, and W. Fang, Design, fabrication, and testing of a 3-DOF HARM micromanipulator on (111) silicon substrate, Sensors and Actuators A: Physical, vol.125, issue.2, pp.438-445, 2006.
DOI : 10.1016/j.sna.2005.06.013

P. Charbonnel, FlexIn, un outil d'aide à la conception de mécanismes flexibles -Développement d'un module logiciel pour l'estimation des charges critiques de flambage des structures treillis, 2005.

H. S. Choi, D. C. Lee, S. S. Kim, and C. S. Han, The development of a microgripper with a perturbation-based configuration design method, Journal of Micromechanics and Microengineering, vol.15, issue.6, pp.1327-1333, 2005.
DOI : 10.1088/0960-1317/15/6/026

N. Chronis and L. P. Lee, Electrothermally activated SU-8 microgripper for single cell manipulation in solution, Journal of Microelectromechanical Systems, vol.14, issue.4, pp.857-863, 2005.
DOI : 10.1109/JMEMS.2005.845445

V. Dampuré and C. E. , FlexIn, un outil d'aide à la conception de mécanismes flexibles -Calcul des contraintes mécaniques dans les structures de type treillis et integration dans le logiciel FlexIn, 2005.

V. Dampuré, FlexIn, un outil d'aide à la conception de mécanismes flexibles -Fonction d2geoptmisesbx permettant le calcul des contraintes mécaniques dans les structures flexibles de type treillis, C.E.A, 2005.

K. Deb, S. Agrawal, A. Pratab, and T. Meyarivan, A fast elitist nondominated sorting genetic algorithm for multi-objective optimization: Nsga-II, Proc. of the 6th Int. Conf. on Parallel Problem Solving from Nature, pp.849-858, 2000.

R. P. Dziedzic, M. I. Frecker, and R. S. Haluck, Topology Design of Multifunctional Compliant Mechanisms With Smart Material Actuation, Volume 5: 27th Biennial Mechanisms and Robotics Conference, pp.2002-34212, 2002.
DOI : 10.1115/DETC2002/MECH-34212

M. I. Frecker, G. K. Ananthasuresh, S. Nishiwaki, N. Kikuchi, and S. Kota, Topological Synthesis of Compliant Mechanisms Using Multi-Criteria Optimization, Journal of Mechanical Design, vol.119, issue.2, pp.238-245, 1997.
DOI : 10.1115/1.2826242

M. Frecker and S. Canfield, Optimal design and experimental validation of compliant mechanical amplifiers for piezoceramic stack actuators, Journal of Intelligent Material Systems and Structures, pp.360-369, 2000.

M. Frecker, Recent Advances in Optimization of Smart Structures and Actuators, Journal of Intelligent Material Systems and Structures, vol.14, issue.4-5, pp.207-216, 2003.
DOI : 10.1177/1045389X03031062

M. Grossard, Analyse des déformations d'une structure treillis pour la mesure d'effort externe par proprioception, 2006.

M. Grossard, Les techniques de placement optimal d'actionneurs et de capteurs, basées sur les critères de commandabilité et d'observabilité, 2006.

M. Grossard, C. Rotinat-libersa, N. Chaillet, and Y. Perrot, Flexible building blocks method for the optimal design of compliant mechanisms using piezoelectric material, 12th IFToMM World Congress, 2007.

P. Hajela and E. Lee, Genetic algorithms in truss topological optimization, International Journal of Solids and Structures, vol.32, issue.22, pp.3341-3357, 1995.
DOI : 10.1016/0020-7683(94)00306-H

L. L. Howell and A. A. Midha, A Method for the Design of Compliant Mechanisms With Small-Length Flexural Pivots, Journal of Mechanical Design, vol.116, issue.1, pp.280-290, 1994.
DOI : 10.1115/1.2919359

L. L. Howell, Compliant mechanisms, 2001.

D. C. Kemeny, L. L. Howell, and S. P. Magleby, Using compliant mechanisms to improve manufacturability in MEMS, Proc. ASME Design Engineering Technical Conf, pp.2002-34178, 2002.

C. J. Kim, S. Kota, and Y. M. Moon, An Instant Center Approach to the Conceptual Design of Compliant Mechanisms, Volume 2: 28th Biennial Mechanisms and Robotics Conference, Parts A and B, pp.2004-57388, 2004.
DOI : 10.1115/DETC2004-57388

D. H. Kim, M. G. Lee, B. Kim, and Y. Sun, A superelastic alloy microgripper with embedded electromagnetic actuators and piezoelectric force sensors: a numerical and experimental study, Smart Materials and Structures, vol.14, issue.6, pp.1265-1272, 2005.
DOI : 10.1088/0964-1726/14/6/019

S. Kota, Tailoring unconventional actuators using compliant transmissions: design methods and applications, IEEE/ASME Transactions on Mechatronics, vol.4, issue.4, pp.396-408, 1999.
DOI : 10.1109/3516.809518

G. K. Lau, Systematic design of displacement ? Amplifying mechanisms for piezoelectric stacked actuators using topology optimization, Journal of Intelligent Material Systems and Structures, pp.685-695, 2000.

W. H. Lee, B. H. Kang, Y. S. Oh, H. Stephanou, A. C. Sanderson et al., Micropeg manipulation with a compliant microgripper, Proc. IEEE Int. Conf. on Robotics and Automation, pp.3213-3218, 2003.

Q. S. Li, D. K. Liu, J. Tang, N. Zhang, and C. M. Tam, Combinatorial optimal design of number and positions of actuators in actively controlled structures using genetic algorithms, Journal of Sound and Vibration, vol.270, issue.4-5, pp.611-624, 2004.
DOI : 10.1016/S0022-460X(03)00130-5

X. Liu and D. W. Begg, On simultaneous optimisation of smart structures ??? Part I: Theory, Computer Methods in Applied Mechanics and Engineering, vol.184, issue.1, pp.15-24, 2000.
DOI : 10.1016/S0045-7825(99)00010-9

K. J. Lu and S. Kota, Parameterization Strategy for Optimization of Shape Morphing Compliant Mechanisms Using Load Path Representation, Volume 2: 29th Design Automation Conference, Parts A and B, 2003.
DOI : 10.1115/DETC2003/DAC-48775

K. J. Lu and S. Kota, Design of Compliant Mechanisms for Morphing Structural Shapes, Journal of Intelligent Material Systems and Structures, vol.14, issue.6, pp.379-391, 2003.
DOI : 10.1177/1045389X03035563

H. Maddisetty and M. Frecker, Dynamic Topology Optimization of Compliant Mechanisms and Piezoceramic Actuators, Journal of Mechanical Design, vol.126, issue.6, pp.975-983, 2002.
DOI : 10.1115/1.1814638

N. D. Mankame and G. K. Ananthasuresh, Contact Aided Compliant Mechanisms: Concept and Preliminaries, Volume 5: 27th Biennial Mechanisms and Robotics Conference, p.34211, 2002.
DOI : 10.1115/DETC2002/MECH-34211

A. Menciassi, A. Eisinberg, G. Scalari, C. Anticoli, M. C. Carrozza et al., Force feedback-based microinstrument form measuring tissue properties and pulse in microsurgery, Proc. IEEE International Conference on Robotics and Automation, pp.626-631, 2001.

O. Millet, Electrostatic actuated micro gripper using an amplification mechanism, Sensors and Actuators A: Physical, vol.114, issue.2-3, pp.371-378, 2004.
DOI : 10.1016/j.sna.2003.11.004

T. Muraoka, K. Kinbara, and T. Aida, Mechanical twisting of a guest by a photoresponsive host, Nature, vol.30, issue.7083, pp.512-515, 2006.
DOI : 10.1038/nature04635

S. Nishiwaki, M. I. Frecker, S. Min, and N. Kikuchi, Topology optimization of compliant mechanisms using the homogenization method, International Journal for Numerical Methods in Engineering, vol.10, issue.3, pp.535-559, 1998.
DOI : 10.1002/(SICI)1097-0207(19980615)42:3<535::AID-NME372>3.0.CO;2-J

Y. S. Oh, W. H. Lee, H. E. Stephanou, and G. D. Skidmore, Design, Optimization, and Experiments of Compliant Microgripper, Microelectromechanical Systems, pp.2003-55013, 2003.
DOI : 10.1115/IMECE2003-55013

J. Parrain, FlexIn, un outil d'aide à la conception de mécanismes flexibles -Conception et développement d'une mini-structure flexible pour la caractérisation en biologie, 2006.

R. Pérez, N. Chaillet, K. Domanski, P. Janus, and P. Grabiec, Fabrication, modeling and integration of a silicon technology force sensor in a piezoelectric micro-manipulator, Sensors and Actuators A: Physical, vol.128, issue.2, pp.367-375, 2006.
DOI : 10.1016/j.sna.2006.01.042

I. Roch, P. Bidaud, D. Collard, and L. Buchaillot, Fabrication and characterization of an SU-8 gripper actuated by a shape memory alloy thin film, Journal of Micromechanics and Microengineering, vol.13, issue.2, pp.330-336, 2003.
DOI : 10.1088/0960-1317/13/2/323

L. Saint, Contribution au développement de critères de translation implantables dans FlexIn, 2004.

A. Saxena, L. Yin, and G. K. Ananthasuresh, PennSyn 2.0: Enhancements to a Synthesis Software for Compliant Mechanisms, Volume 5: 27th Biennial Mechanisms and Robotics Conference, p.34210, 2002.
DOI : 10.1115/DETC2002/MECH-34210

R. Sedaghati and E. Esmailzadeh, Optimum design of structures with stress and displacement constraints using the force method, International Journal of Mechanical Sciences, vol.45, issue.8, pp.1369-1389, 2003.
DOI : 10.1016/j.ijmecsci.2003.10.001

O. Sigmund, On the Design of Compliant Mechanisms Using Topology Optimization*, Mechanics of Structures and Machines, vol.44, issue.4, pp.493-524, 1997.
DOI : 10.1063/1.117961

O. Sigmund, A 99 line topology optimization code written in Matlab, Structural and Multidisciplinary Optimization, vol.21, issue.2, pp.120-127, 2001.
DOI : 10.1007/s001580050176

E. C. Silva and N. Kikuchi, Design of piezoelectric transducers using topology optimization, Smart Materials and Structures, vol.8, issue.3, pp.350-365, 1999.
DOI : 10.1088/0964-1726/8/3/307

B. P. Trease, K. J. Lu, and S. Kota, Biomimetic Compliant System for Smart Actuator-Driven Aquatic Propulsion: Preliminary Results, Aerospace, pp.2003-41446, 2003.
DOI : 10.1115/IMECE2003-41446

Y. C. Tsai, Design and analysis of planar compliant microgripper based on kinematic approach, Journal of Micromechanics and Microengineering, vol.15, issue.1, pp.143-156, 2005.
DOI : 10.1088/0960-1317/15/1/022

M. Y. Wang, D. Wang, and A. Guo, A level set method for structural topology optimization, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.1-2, pp.227-246, 2003.
DOI : 10.1016/S0045-7825(02)00559-5

M. Y. Wang, D. Wang, and A. Guo, Structural shape and topology optimization in a level-set-based framework of region representation, Structural and Multidisciplinary Optimization, vol.27, issue.1-2, pp.1-19, 2004.
DOI : 10.1007/s00158-003-0363-y

M. Y. Wang, S. Chen, X. Wang, and Y. Mei, Design of Multimaterial Compliant Mechanisms Using Level-Set Methods, Journal of Mechanical Design, vol.127, issue.5, pp.941-955, 2005.
DOI : 10.1115/1.1909206

M. Yulin and W. Xiaoming, A level set method for structural topology optimization and its applications, Advances in Eng. Software, pp.415-441, 2004.
DOI : 10.1016/j.advengsoft.2004.06.004

H. Zhang, Robotic micro-assembly of scaffold/cell constructs with a shape memory alloy gripper, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292), pp.1483-1488, 2002.
DOI : 10.1109/ROBOT.2002.1014753